Victron Energy Argodiode 80-2SC 2 batteries 80A

45,18 EUR

Length: 75mm
Width: 160mm
Height: 60mm
Maximum Charge Current: 80A
Maximum Alternator Current: 80A
Number of Batteries: 2
Alternator Energize Input: No
Connection: M6 Studs
Warranty: 5 Years


 Data sheet - click here

Order

Delivery date: 20 days

Stock limit
Add to cart
Product Code: ARG080202000 Do you need help? +40 735 080 844
Add to wishlist Request information
  • Description
  • Reviews (0)

Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V.

All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator.

Simply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely.

Alternator energize input

Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start.

The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run/stop switch is closed.

See more
If you want to express your opinion about this product you can add a review.

The review was sent successfully.

Compara produse

You must add at least one product to compare products.

Was added to wishlist!

Was removed from wishlist!