Victron Energy BlueSolar PWM LCD&USB 48V 30A
![Victron Energy BlueSolar PWM LCD&USB 48V 30A [1]](https://gomagcdn.ro/domains/poweracu.com/files/product/original/victron-energy-bluesolar-pwm-lcd-usb-12-24v-30a-copie-763-345310172503.jpg "Victron Energy BlueSolar PWM LCD&USB 48V 30A [1]")
Battery Voltage: 48V
Rated Charge Current: 30A
Maximum Solar Voltage : 100V
Load Output: Manual control + low voltage disconnect + timer
Grounding: Common positive
IP Rating: IP20
Dimensions: H101 x W184 x D47mm
Weight (kg): 0.30
Rated Charge Current: 30A
Maximum Solar Voltage : 100V
Load Output: Manual control + low voltage disconnect + timer
Grounding: Common positive
IP Rating: IP20
Dimensions: H101 x W184 x D47mm
Weight (kg): 0.30
Delivery date: 20 days
Product Code:
SCC040030050
Do you need help?
+40 735 080 844
- Description
- Download (1)
- Reviews (0)
Liquid crystal display
For status monitoring and set-up
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output
This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm
Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Two 5 Volt USB outputs
Maximum current (both outputs combined): 2A
For status monitoring and set-up
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output
This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm
Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Two 5 Volt USB outputs
Maximum current (both outputs combined): 2A
-
Victron-Energy-BlueSolar-Charge-Controllers-Data-Sheet
Download
If you want to express your opinion about this product you can add a review.
write a review
Similar products
