Victron Energy BlueSolar PWM LCD&USB 12/24V 20A
![Victron Energy BlueSolar PWM LCD&USB 12/24V 20A [1]](https://gomagcdn.ro/domains/poweracu.com/files/product/original/pwm-758-381055725284.jpg "Victron Energy BlueSolar PWM LCD&USB 12/24V 20A [1]")
Battery Voltage: 12/24 V automatic system voltage detection
Rated Charge Current: 20A
Maximum Solar Voltage : 28V / 55V
Load Output: Manual control + low voltage disconnect + timer
Grounding: Common positive
IP Rating: IP20
Dimensions: H96 x W169 x D36mm
Weight (kg): 0.15
Rated Charge Current: 20A
Maximum Solar Voltage : 28V / 55V
Load Output: Manual control + low voltage disconnect + timer
Grounding: Common positive
IP Rating: IP20
Dimensions: H96 x W169 x D36mm
Weight (kg): 0.15
Delivery date: Europe, 5-10 days. Other countries - please check with our sales representative
Product Code:
SCC010020050
Do you need help?
+40 735 080 844
- Description
- Download (1)
- Reviews (0)
Liquid crystal display
For status monitoring and set-up
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output
This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm
Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Two 5 Volt USB outputs
Maximum current (both outputs combined): 2A
For status monitoring and set-up
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output
This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm
Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Two 5 Volt USB outputs
Maximum current (both outputs combined): 2A
-
Victron-Energy-BlueSolar-Charge-Controllers-Data-Sheet
Download
If you want to express your opinion about this product you can add a review.
write a review
Similar products
