The system includes:
- 3 x 100W photovoltaic panel
- Controller 20A
- Inverter pur sinus 500W
- 100A gel battery
- 2 x 4200 mm bar
- 8 x clamping system 10x160
- 8 x fixing elements
- kit electric
Solar Monocrystalline Panel 12V 100W
- Monocrystalline solar cells
- 2 by-pass diodes in the socket to minimize the voltage drop
- Anodised aluminum frame
- Special ESG solar glass reinforced
- Very resistant to environmental influences
- Perfect for 12 V systems
Technical specifications:
- Max power (Pmax): 100 W
- Tolerance: 0-3%
- Open Voltage (Voc): 22.8 volts
- Maximum working voltage (Vmpp): 18.5 volts
- Short circuit current (Isc): 5.73 amps
- Maximum working current: 5.41 Amps
- Maximum system voltage: 1000 VDC
- Working temperatures: -40 ° C to + 80 ° C
- Dimensions: 1000 x 680 x 35 mm
- Weight: 9.4 kg
- Tested in accordance with the standards: IEC / EN 61215: 2005; IEC / EN 61730-1 A2; IEC / EN 61730-2 A1
Powersave PWM 20A 12 / 24V Solar Controller
- 12V / 24 V system voltages are automatically recognized.
- an upgrade of the 3-step PWM load algorithm is adopted. Applying a battery charging equalization, either periodically or when downloaded, can effectively prevent the non-equalizing and sulfurizing battery, thus extending the life of the battery.
- with the compensation of the used temperature, the load parameters can be adjusted automatically.
- the product offers overload protection, overload, overload, and short-circuit protection.
- by virtue of an advanced startup method, large capacity loads can be started without problems.
- LCD screen and a man-machine interface with a key.
- user-friendly browser design and dynamic interfaces provide convenient and intuitive operation.
- TVS protection at switchboard.
- Rated current 20A
- Current display function Yes
- No loss load <10mA / 12V; <12mA / 24V
- Max. solar energy input voltage <55V
- Max. Battery voltage at <35V
- Overvoltage protection 17.0V; × 2 / 24V;
- 13.2V recovery charge voltage; × 2 / 24V;
- 12.6 V recovery overload discharge overload; × 2 / 24V;
- Overload discharge 11.1V; × 2 / 24V;
- Equalizing 30 day loading interval
- Equalizing loading time 1 H
- Boost load time 2H
- Temperature compensation -3.0mV / ℃ / 2V
- Operating temperature -25 ℃ to + 55 ℃;
- Weight 160g
- Size: 130 × 75 × 38 (mm)
Inverter Poweracu Pur Sinus 500W 12V
- Pure sine wave output (THD<3%)
- Soft-start technology.
- High efficiency-converts the battery’s available power
- 100% sufficient power.
- Aluminum shell with good heat dissipation and strong shock resistance.
- Optional Crocodile clip and cigar lighters,easy to connect batteries or vehicles’ batteries.
- USB charging port: 5V ,ideally qualified for powering your phone,laptop,etc.
- LED indicators for power and protections.
- Switch-mode design, easy to use.
- Intelligent fan for cooling,long use life.
- OEM and ODM are available, shell color can be customized.
- Optional remote control and LED display for 800W-6000W inverters.
Protection Functions: Over load protection, Over temperature protection, Over voltage protection, Low voltage protection, Short circuit protection, Revers polarity protection.
- Rated power 500W
- Peak power 1000W
- Input voltage DC12V
- Output voltage 220VAC or 230VAC or 240VAC±5%
- Unload current less than 0.6A
- Output frequency 50Hz±0.5Hz or 60Hz±0.5Hz
- Output waveform Pure Sine Wave
- Waveform distortion THD<3%(Linear load)
- USB port 5V 1A
- Max.efficiency 90%
- Input voltage range 10-15.5V
- Low voltage alarm 10.5±0.5V
- Low voltage protection 10±0.5V
- Over voltage protection 15.5±0.5V
- Low voltage recover 13±0.5V
- Over voltage recover 14.8V±0.5V
- Protection function Low voltage Alarm at first, voltage continously reduce. LED Red light on & shut sown., Over voltage LED Red light on, shut down, Over load LED Red light on, shut down, Over temperature Alarm at first, tempurature continously rise.LED Red light on & shut sown, Short circuit LED Red light on, Input reverse polarity Fuse burn-out
- Working temperature -10°C - +50°C
- Storage temperature -30°C - +70°C
- Dimension(mm) 244x112x67mm
- Net./gross weight(g) 1197/1479g
- Cooling method Intelligent air cooling
VRLA Battery ULTRACELL 12 V 100 Ah
- Has a longer discharge time compared to other batteries.
- Its special plate design increases the life cycle of the battery especially in warmer temperatures.
- A special separator within the battery can boost its performance.
- Length: 328 ± 2 mm
- Width: 173 ± 2 mm
- Container Height: 212 ± 2 mm
- Total Height (with terminal): 232 ± 2 mm
- Approx Weight: Approx 30.4 kg
Types Of Systems: OFF GRID systems (batteries + inverter)