The pure sine wave inverter offering superior quality true sine wave output, it is designed to operate popular power tools and sensitive loads. Connect JYP 4000W pure sine wave inverter with battery terminals,then you can get AC power for your appliances,the AC output identical to, and in some cases better than the power supplied by your utility. And there is a remote control function and an ON/OFF remote switch with 5m communication wire is optional.
·Input & Output fully isolated.
·The remote control function and 5m wire with switcher optional.
·High Surge: high surge current capability starts difficult loads such as TVs, camps, motors and other inductive loads.
·Grouding earth protection: There is grounding terminal in front of panel, you can grounding the inverter for more safety concern.
·Soft start : smooth start-up of the appliances.
·Pure sine wave output waveform : clean power for sensitive loads.
·AC output identical to, and in some cases better than the power supplied by your utility
·Cooling fan in the inverter is thermally activated and comes on when the inverters becomes warm,and turns off automatically after the inverter has cooled.
·Low total harmonic distortion : below 3%
·Two LED indicators on the front panel shows the working and failure state.
Protection Function :
·Low voltage alarm & Shutdown
·Over voltage protection
·Over temperature protection
·Short circuit protection
·Reverse Polarity protection
·Auto.reset after being in protected
·Grouning earth protection
Rated power 4000W
Peak power 8000W
Input voltage DC48V
Output voltage 220VAC or 230VAC or 240VAC±5%
Unload current less than 0.8A
Output frequency 50Hz±0.5Hz or 60Hz±0.5Hz
Output waveform Pure Sine Wave
Waveform distortion THD＜3%(Linear load)
USB port 5V 1A
Input voltage range 40-61V
Low voltage alarm 42±1V
Low voltage protection 40±15V
Over voltage protection 61±1V
Low voltage recover 48±1V
Over voltage recover 59V±1V
Protection function Low voltage Alarm at first, voltage continously reduce. LED Red light on & shut sown.
Over voltage LED Red light on, shut down
Over load LED Red light on, shut down
Over temperature Alarm at first, tempurature continously rise.LED Red light on & shut sown
Short circuit LED Red light on
Input reverse polarity Fuse burn-out
Working temperature -10°C - +50°C
Storage temperature -30°C - +70°C
Net./gross weight(g) 10000/12063g
Warranty 1 years
Cooling method Intelligent air cooling