The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 912 Ah;
- (C 10): 670 Ah;
Dimensions L x L x H: 145 x 206 x 684 mm;
Weight: 38.1 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 8
Capacity:
- (C 120): 3310 Ah;
- (C 10): 2430 Ah;
Dimensions L x L x H: 487 x 212 x 813 mm;
Weight: 136.6 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 440 Ah;
- (C10): 323 Ah;
Dimensions L x L x H: 145 x 206 x 389 mm;
Weight: 20.3 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 4
Capacity:
- (C 120): 2130 Ah;
- (C 10): 1560 Ah;
Dimensions L x L x H: 275 x 210 x 829 mm;
Weight: 85.7 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport
Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 1120 Ah;
- (C 10): 816 Ah;
Dimensions L x L x H: 191 x 210 x 684 mm;
Weight: 45.4 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 8
Capacity:
- (C 120): 3480 Ah;
- (C10): 2555 Ah;
Dimensions L x L x H: 487 x 212 x 813 mm;
Weight: 142.9 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 460 Ah;
- (C10): 340 Ah;
Dimensions L x L x H: 124 x 206 x 505 mm;
Weight: 20.6 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 4
Capacity:
- (C 120): 2335 Ah;
- (C 10): 1710 Ah;
Dimensions L x L x H: 275 x 210 x 829 mm;
Weight: 90.1 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 1220 Ah;
- (C 10): 900 Ah;
Dimensions L x L x H: 191 x 210 x 684 mm;
Weight: 50 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 8
Capacity:
- (C 120): 3810 Ah;
- (C 10): 2800 Ah;
Dimensions L x L x H: 487 x 212 x 813 mm;
Weight: 154.3 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport
Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 530 Ah;
- (C10): 390 Ah;
Dimensions L x L x H: 124 x 206 x 505 mm;
Weight: 24.1 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 6
Capacity:
- (C 120): 2640 Ah;
- (C 10): 1940 Ah;
Dimensions L x L x H: 399 x 214 x 813 mm;
Weight: 105.5 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport
Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 1415 Ah;
- (C 10): 1040 Ah;
Dimensions L x L x H: 233 x 210 x 684 mm;
Weight: 54.1 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 8
Capacity:
- (C 120): 4210 Ah;
- (C 10): 3090 Ah;
Dimensions L x L x H: 576 x 212 x 813 mm;
Weight: 170.1 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 640 Ah;
- (C10): 470 Ah;
Dimensions L x L x H: 145 x 206 x 505 mm;
Weight: 26.7 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 6
Capacity:
- (C 120): 2775 Ah;
- (C 10): 2040 Ah;
Dimensions L x L x H: 399 x 214 x 813 mm;
Weight: 114 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 1523 Ah;
- (C10): 1120 Ah;
Dimensions L x L x H: 233 x 210 x 684 mm;
Weight: 60.9 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 8
Capacity:
- (C 120): 4580 Ah;
- (C 10): 3360 Ah;
Dimensions L x L x H: 576 x 212 x 813 mm;
Weight: 182.1 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 745 Ah;
- (C 10): 550 Ah;
Dimensions L x L x H: 166 x 206 x 505 mm;
Weight: 32.1 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 6
Capacity:
- (C 120): 2950 Ah;
- (C 10): 2150 Ah;
Dimensions L x L x H: 399 x 214 x 813 mm;
Weight: 118 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 300 Ah;
- (C 10): 220 Ah;
Dimensions L x L x H: 103 x 206 x 389 mm;
Weight: 14.6Kg;
Topology: acid.

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 1740 Ah;
- (C 10): 1260 Ah;
Dimensions L x L x H: 275 x 210 x 684 mm;
Weight: 67.2 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 2
Capacity:
- (C 120): 802 Ah;
- (C10): 590 Ah;
Dimensions L x L x H: 145 x 206 x 684 mm;
Weight: 33.4 Kg;
Topology: acid

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications.

PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine.

Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations.

Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.

Products available both filled & charged and moist charged
Up to 5200 cycles to 25% depth of discharge
Topping up required once a year only
Minimal maintenance required
Excellent operational safety including: fully insulated connectors and terminals, acid proof flame arrestor plug for each cell, protection of polarities during transport

Voltage rating: 2V
Nr. Of terminals: 6
Capacity:
- (C 120): 3050 Ah;
- (C 10): 2240 Ah;
Dimensions L x L x H: 399 x 214 x 813 mm;
Weight: 123.5 Kg;
Topology: acid