Powersave

Display: 1-24 from 42 products

1
Solar charge controller Powersave PWM 10A 12/24V SR-HP2410
  • Brand: Powersave
1.12V/ 24 V system voltages are automatically recognized.
2.An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charging to the battery periodically or when over discharged, can effectively prevent the battery from non-equalization and sulfuration, thus extending the battery's service life.
3.With temperature compensation employed, charging parameters can be automatically adjusted.
4.A wide range of load working modes facilitate the product's application to different types of load.
5.The product provides overcharge, over-discharge, overload protection, as well as short-circuit protection.
6.By virtue of an advanced load starting method, large-capacitance loads can be started smoothly.
7.The product provides a dot matrix graphic LCD screen and a human-machine interface with a key.
8.The user-friendly design of browser and dynamic interfaces ensure convenient and intuitive operations.
9.Boasting an industrial grade design, the product can function well in various tough conditions.
10.TVS lighting protection is adopted.

Rated current 10A
System voltage Automatic recognition of 12 V/ 24 V
No-load loss < 10mA/12V;< 12mA/24V
Max. Solar energy input voltage <55V
Max. voltage at the battery end <35V
Overvoltage protection 17.0V;×2/24V;
Equalizing charging voltage 14.6V;×2/24V;
Boost charging voltage 14.4V;×2/24V;
Floating charging voltage 13.8V;×2/24V;
Charging recovery voltage 13.2V;×2/24V;
Over-discharge recovery voltage 12.6V;×2/24V;
Over-discharge voltage 11.1V;×2/24V;
Equalizing charging interval 30days
Equalizing charging time 1H
Boost charging time 2H
Temperature compensation -3.0mV/℃/2V
Light control voltage
- Light control on 5V, ×2/24V; 
- Light control off 6V, ×2/24V;
Light control judgment time 1minute
Operating temperature -25℃ to +55℃;
IP protection degree IP30
Net  weight 100g
Protection functions 
- Solar panel short circuit and reverse-connection protection
- Over-temperature, overload and short circuit protection
Dimensions 103×71×36(mm)
Read more
19.95 EUR VAT included
The product is in stock
Details
2
Solar charge controller Powersave PWM 30A 12/24V SR-HP2430
  • Brand: Powersave
1) 12V/ 24 V system voltages are automatically recognized.
2) Charging program options for sealed, GEL and flooded lead-acid batteries and lithium batteries are available.
3) An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charge to the battery periodically or when over discharged, can effectively prevent the battery from non-equalization and sulfuration, thus extending the battery's service life (with the exception of GEL and lithium batteries).
4) With temperature compensation employed, charging parameters can be automatically adjusted (with the exception of lithium batteries).
5) A wide range of load working modes facilitate the product's application to different types of street lights and monitoring devices.
6) The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
7) By virtue of an advanced load starting method, large-capacitance loads can be started smoothly.
8) A range of parameter settings and power-down saving functions are available ,thus requiring no repeated setting.
9) The product provides a dot matrix graphic LCD screen and a human-machine interface with 2 keys.
10)The user-friendly design of browser and animation interfaces ensures convenient and intuitive operations.
11) (An optional communication function) provides a RJ12 data port (output of TTL /MAX232 /bluetooth signals), with the data adopting the standard 
Modbus protocol, and can be used together with our upper computer monitoring software.
12) Boasting an industrial grade design, the product can function well in various tough conditions.
13) TVS lighting protection is adopted.

Rated current 30A
System voltage Automatic recognition of 12V/24V
No-load loss < 13mA/12V;< 15mA/24V
Max. Solar energy input voltage  <55
Max. voltage at the battery end <34V
Max. voltage at the battery end  Flooded FLD
Overvoltage protection 16.0V
Equalizing charging voltage    14.8
Boost charging voltage 14.6
Floating charging voltage 13.8
Charging recovery voltage    13.2V
Over-discharge recovery voltage 12.5V(settable with the keys)
Over-discharge voltage 11.0V(settable with the keys)
Equalizing charging interval 30days
Equalizing charging time 1H
Boost charging time    2H    -
Temperature compensation     -3.0mV/℃/2V
Light controlvoltage    Light control on 5V, light control off 4 V (light control on minus 1 V)    
Light control judgment time    10 minutes     
USB function Yes
Operating temperature -25℃to+55℃;    
IP protection degree IP30    
Net weight 390g
Protection functions: attery reverse connection protection, solar panel reverse connection protection, reverse charging protection at night    
Charging overload protection,overcurrent protection, short circuit protection    
Dimensions(mm) 164.0×103.5×47.0
Read more
42.12 EUR VAT included
The product is in stock
Nou
Details
3
Solar charge controller Powersave PWM 40A 12/24V SR-HP2440
  • Brand: Powersave
1) 12V/ 24 V system voltages are automatically recognized.
2) Charging program options for sealed, GEL and flooded lead-acid batteries and lithium batteries are available.
3) An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charge to the battery periodically or when over discharged, can effectively prevent the battery from non-equalization and sulfuration, thus extending the battery's service life (with the exception of GEL and lithium batteries).
4) With temperature compensation employed, charging parameters can be automatically adjusted (with the exception of lithium batteries).
5) A wide range of load working modes facilitate the product's application to different types of street lights and monitoring devices.
6) The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
7) By virtue of an advanced load starting method, large-capacitance loads can be started smoothly.
8) A range of parameter settings and power-down saving functions are available ,thus requiring no repeated setting.
9) The product provides a dot matrix graphic LCD screen and a human-machine interface with 2 keys.
10)The user-friendly design of browser and animation interfaces ensures convenient and intuitive operations.
11) (An optional communication function) provides a RJ12 data port (output of TTL /MAX232 /bluetooth signals), with the data adopting the standard 
Modbus protocol, and can be used together with our upper computer monitoring software.
12) Boasting an industrial grade design, the product can function well in various tough conditions.
13) TVS lighting protection is adopted.

Rated current 40A
System voltage Automatic recognition of 12V/24V
No-load loss < 13mA/12V;< 15mA/24V
Max. Solar energy input voltage  <55
Max. voltage at the battery end <34V
Max. voltage at the battery end  Flooded FLD
Overvoltage protection 16.0V
Equalizing charging voltage    14.8
Boost charging voltage 14.6
Floating charging voltage 13.8
Charging recovery voltage    13.2V
Over-discharge recovery voltage 12.5V(settable with the keys)
Over-discharge voltage 11.0V(settable with the keys)
Equalizing charging interval 30days
Equalizing charging time 1H
Boost charging time    2H    -
Temperature compensation     -3.0mV/℃/2V
Light controlvoltage    Light control on 5V, light control off 4 V (light control on minus 1 V)    
Light control judgment time    10 minutes     
USB function Yes
Operating temperature -25℃to+55℃;    
IP protection degree IP30    
Net weight 390g
Protection functions: attery reverse connection protection, solar panel reverse connection protection, reverse charging protection at night    
Charging overload protection,overcurrent protection, short circuit protection    
Dimensions(mm) 164.0×103.5×47.0
Read more
54.22 EUR VAT included
The product is in stock
Details
4
Solar charge controller Powersave PWM 60A 12/24V SR-HP2460
  • Brand: Powersave
1) 12V/ 24 V system voltages are automatically recognized.
2) Charging program options for sealed, GEL and flooded lead-acid batteries and lithium batteries are available.
3) An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charge to the battery periodically or when over discharged, can effectively prevent the battery from non-equalization and sulfuration, thus extending the battery's service life (with the exception of GEL and lithium batteries).
4) With temperature compensation employed, charging parameters can be automatically adjusted (with the exception of lithium batteries).
5) A wide range of load working modes facilitate the product's application to different types of street lights and monitoring devices.
6) The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
7) By virtue of an advanced load starting method, large-capacitance loads can be started smoothly.
8) A range of parameter settings and power-down saving functions are available ,thus requiring no repeated setting.
9) The product provides a dot matrix graphic LCD screen and a human-machine interface with 2 keys.
10)The user-friendly design of browser and animation interfaces ensures convenient and intuitive operations.
11) (An optional communication function) provides a RJ12 data port (output of TTL /MAX232 /bluetooth signals), with the data adopting the standard 
Modbus protocol, and can be used together with our upper computer monitoring software.
12) Boasting an industrial grade design, the product can function well in various tough conditions.
13) TVS lighting protection is adopted.

Rated current 60A
System voltage Automatic recognition of 12V/24V
No-load loss < 13mA/12V;< 15mA/24V
Max. Solar energy input voltage  <55
Max. voltage at the battery end <34V
Max. voltage at the battery end  GEL
Overvoltage protection 16.0V
Boost charging voltage 14.2
Floating charging voltage 13.8
Charging recovery voltage    13.2V
Over-discharge recovery voltage 12.5V(settable with the keys)
Over-discharge voltage 11.0V(settable with the keys)
Boost charging time    2H    -
Temperature compensation     -3.0mV/℃/2V
Light controlvoltage    Light control on 5V, light control off 4 V (light control on minus 1 V)    
Light control judgment time    10 minutes     
USB function No
Operating temperature -25℃ to +55℃;    
IP protection degree IP30    
Net weight 650g
Protection functions: attery reverse connection protection, solar panel reverse connection protection, reverse charging protection at night    
Charging overload protection,overcurrent protection, short circuit protection    
Dimensions(mm) 189.27×127.2×54
Read more
82.43 EUR VAT included
The product is in stock
Details
5
Solar charge controller Powersave MPPT 20A 12/24V LCD display SR-ML2420
  • Brand: Powersave
◆ With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point. 
◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method.   
◆ A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an extremely short time.
◆ The product boasts an optimum MPPT tracking efficiency of up to 99.9%. 
◆ Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. 
◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, lithium batteries, etc.
◆ The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level. 
◆ Instantaneous large current startup of capacitive loads is supported.
◆ Automatic recognition of battery voltage is supported.
◆ LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults. 
◆ Historical data storage function is available, and data can be stored for up to a year.
◆ The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also modify controller parameters.  
◆ The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.
◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery's service life. 
◆ TVS lighting protection

System voltage 12V/24V Auto
No-load loss 0.7 W to 1.2W
Battery voltage 9 to 35
Max. solar input voltage 100V (25°C), 90V (-25°C)
Max. power point voltage range Battery voltage +2V to 75V
Rated charging current 20A
Rated load current 20A
Max. capacitive load capacity 10000uF
Max. photovoltaic system input power 260W/ 12V, 520W/ 24V
Conversion efficiency ≤ 98%
MPPT tracking efficiency > 99%
Temperature compensation factor -3.0mv/ °C/ 2V (default)
Operating temperature -35°C to +45℃
Protection degree IP32
Weight 1.4kg
Communication method RS232
Altitude ≤ 3000m
Product dimensions 210*151*59.5mm
Read more
100.57 EUR VAT included
The product is in stock
Nou
Details
6
Solar charge controller Powersave MPPT 30A 12/24V LCD display SR-ML2430
  • Brand: Powersave
◆ With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point. 
◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method.   
◆ A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an extremely short time.
◆ The product boasts an optimum MPPT tracking efficiency of up to 99.9%. 
◆ Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. 
◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, lithium batteries, etc.
◆ The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level. 
◆ Instantaneous large current startup of capacitive loads is supported.
◆ Automatic recognition of battery voltage is supported.
◆ LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults. 
◆ Historical data storage function is available, and data can be stored for up to a year.
◆ The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also modify controller parameters.  
◆ The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.
◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery's service life. 
◆ TVS lighting protection

System voltage 12V/24V Auto
No-load loss 0.7 W to 1.2W
Battery voltage 9 to 35
Max. solar input voltage 100V (25°C), 90V (-25°C)
Max. power point voltage range Battery voltage +2V to 75V
Rated charging current 30A
Rated load current 20A
Max. capacitive load capacity 10000uF
Max. photovoltaic system input power 400W/ 12V, 800W/ 24V
Conversion efficiency ≤ 98%
MPPT tracking efficiency > 99%
Temperature compensation factor -3.0mv/ °C/ 2V (default)
Operating temperature -35°C to +45℃
Protection degree IP32
Weight 2kg
Communication method RS232
Altitude ≤ 3000m
Product dimensions 238*173*72.5mm
Read more
136.85 EUR VAT included
The product is in stock
Details
7
Solar charge controller Powersave MPPT 40A 12/24V LCD display SR-ML2440
  • Brand: Powersave
◆ With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point. 
◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method.   
◆ A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an extremely short time.
◆ The product boasts an optimum MPPT tracking efficiency of up to 99.9%. 
◆ Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. 
◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, lithium batteries, etc.
◆ The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level. 
◆ Instantaneous large current startup of capacitive loads is supported.
◆ Automatic recognition of battery voltage is supported.
◆ LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults. 
◆ Historical data storage function is available, and data can be stored for up to a year.
◆ The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also modify controller parameters.  
◆ The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.
◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery's service life. 
◆ TVS lighting protection

System voltage 12V/24V Auto
No-load loss 0.7 W to 1.2W
Battery voltage 9 to 35
Max. solar input voltage 100V (25°C), 90V (-25°C)
Max. power point voltage range Battery voltage +2V to 75V
Rated charging current 40A
Rated load current 20A
Max. capacitive load capacity 10000uF
Max. photovoltaic system input power 550W/ 12V, 1100W/ 24V
Conversion efficiency ≤ 98%
MPPT tracking efficiency > 99%
Temperature compensation factor -3.0mv/ °C/ 2V (default)
Operating temperature -35°C to +45℃
Protection degree IP32
Weight 2kg
Communication method RS232
Altitude ≤ 3000m
Product dimensions 238*173*72.5mm
Read more
171.11 EUR VAT included
The product is in stock
Details
8
Solar charge controller Powersave MPPT 60A 12/24/36/48V LCD display SR-ML4860
  • Brand: Powersave
● With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point. 
● A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method.   
● A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an extremely short time.
● The product boasts an optimum MPPT tracking efficiency of up to 99.9%. 
● Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. 
● Different charging program options including those for gel batteries, sealed batteries and open batteries, customized ones, etc. are available.
● The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level. 
● Instantaneous large current startup of capacitive loads is supported.
● Automatic recognition of battery voltage is supported.
● LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults. 
● Historical data storage function is available, and data can be stored for up to a year.
● The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also modify controller parameters.  
● The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.
● All communications are electrically isolated, so users can rest assured in usage.
● The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature and discharging will be halted so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
● With the help of an external battery voltage sampling function, battery voltage sampling is exempted from the effect of line loss, making control more precise.
● Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery's service life. 
● The controller also features a battery over-temperature protection function, and when the external battery temperature exceeds the set value, charging and discharging will be shut off so as to protect components from being damaged by overheat. 
● TVS lighting protection

System voltage 12V/24/36/48V Auto
No-load loss 0.7 W to 1.2W
Battery voltage 9 to 70
Max. solar input voltage 150V (25°C), 145V (-25°C)
Max. power point voltage range Battery voltage +2V to 120V
Rated charging current 60A
Rated load current 20A
Max. capacitive load capacity 10000uF
Max. photovoltaic system input power 800W/ 12V, 1600W/ 24V, 2400W/ 36V, 3200W/ 48V
Conversion efficiency ≤ 98%
MPPT tracking efficiency > 99%
Temperature compensation factor -3.0mv/ °C/ 2V (default)
Operating temperature -35°C to +45℃
Protection degree IP32
Weight 3.6kg
Communication method RS232, RS485
Altitude ≤ 3000m
Product dimensions 285*205*93mm
Read more
338.39 EUR VAT included
The product is in stock
Details
9
Mini Solar charge controller Powersave 20A 12/24V LCD display SR-HM-CU20A
  • Brand: Powersave
The SR-HM-PWM-330W solar charge controller keeps batteries regulated and prevents them from overcharging and discharging. A DC load control feature makes this charge controller ideal for LED lights. A digital display makes monitoring current, discharge current and batter bank capacity a breeze.
  • Digital display shows charging current, discharge current and battery bank capacity
  • Dual USB ports for directly charging portable devices
  • 3 stage charging method: bulk, absorption and floating
  • Ideally suited for three Flex 100 watt Solar Tech Solar panels 320-Watt and less
  • Maximum solar module power input: 320-Watt
  • Maximum solar module open circuit-Voltage inputs: 25-Volt
  • Maximum charging current output: 20-Amp
  • Nominal battery-Voltage output: 12-Volt and 24-Volt
  • Device is designed to flush mount, please see product manual for details
  • PWM technology works on only Low-Voltage panels 32 cell max. 12 or 24 volt
  • 1/16 edge for the flush mount.
Read more
32.05 EUR VAT included
The product is in stock
Details
10
UPS Powersave MA-600 Line Interactive
  • Brand: Powersave

Intelligent CPU Controlled
Wide Input Range
Fully AVR
Cold Start Avaliable
Automatic Battery Cherging in UPS Off Mode
Strong Electromagnetism Compatibility
Self-detection on Startup
Battery Replaceable Without Interruption
Full Protection Against Over Voltage / Low Voltage
 
Capacity: 600VA / 300W
Input Voltage: 220/230 / 240VAC
Frequency: 50-60Hz
Output voltage setting: +/- 10% (battery mode)
Frequency: 50-60 Hz +/- 1Hz
Battery voltage 12VDC
Recharge time: 5h to l90% fully downloaded
LED display
Operating temperature: 0˚C - 40˚C
Relative Humidity: 0-90% without condensation
Noise <40dB at 1m
Size: 308 * 98 * 170mm
 
 
Read more
38.09 EUR VAT included
The product is in stock
Details
11
UPS Powersave MA-800 Line Interactive
  • Brand: Powersave
Intelligent CPU Controlled
Wide Input Range
Fully AVR
Cold Start Avaliable
Automatic Battery Cherging in UPS Off Mode
Strong Electromagnetism Compatibility
Self-detection on Startup
Battery Replaceable Without Interruption
Full Protection Against Over Voltage / Low Voltage

Capacity: 800VA / 480W
Input Voltage: 220/230 / 240VAC
Frequency: 50-60Hz
Output voltage setting: +/- 10% (battery mode)
Frequency: 50-60 Hz +/- 1Hz
Battery voltage 12VDC
Recharge time: 5h to l90% fully downloaded
LED display
Operating temperature: 0˚C - 40˚C
Relative Humidity: 0-90% without condensation
Noise <40dB at 1m
Size: 308 * 98 * 170mm
Read more
50.18 EUR VAT included
The product is in stock
Details
12
UPS Powersave MA-2000 Line Interactive
  • Brand: Powersave
Intelligent CPU Controlled
Wide Input Range
Fully AVR
Cold Start Avaliable
Automatic Battery Cherging in UPS Off Mode
Strong Electromagnetism Compatibility
Self-detection on Startup
Battery Replaceable Without Interruption
Full Protection Against Over Voltage / Low Voltage

Capacity: 2000VA / 1200W
Input Voltage: 220/230 / 240VAC
Frequency: 50-60Hz
Output voltage setting: +/- 10% (battery mode)
Frequency: 50-60 Hz +/- 1Hz
Battery voltage 12VDC
Recharge time: 5h to l90% fully downloaded
LED display
Operating temperature: 0˚C - 40˚C
Relative Humidity: 0-90% without condensation
Noise <40dB at 1m
Size: 370 * 150 * 170mm
Read more
159.02 EUR VAT included
The product is in stock
Details
13
UPS Powersave Defender DSP 3310 10 kVa Online
  • Brand: Powersave
3 Phase Input & 3 Phase Output
IGBT Rectifier
Real Digital Signal Processor (DSP) Controlled Transformerless Design
Input Power Factor Correction PFC (>0,99)
Low Total Harmonic Distortion Level (THDi ?4%)
High Efficiency (up to 94%)
Wide Input Voltage Range
Generator Compatible Operation
Intelligent Battery Management System Extends The Lifetime of Batteries
Static and Manual Bypass
Optional Galvanic Isolation Transformer
Communication with Computers and Network Systems with SNMP availability
Expandable Battery Blocks
Low Installation and Operation Costs
Different Voltage applications with refer to country mains characteristic
EPO ( Emergency Power Off)
50/60 Hz Frequency Converter Version is Avaliable According to Request

Technical data
Power 10kVA
Nominal Active Power 8kW
Input
  • Nr. Phase: 3 phases + N + E
  • Voltage rating: 380/400 / 415VAC
  • Voltage range (100% load) 176 / 280VAC
  • Frequency: 50 / 60Hz
Output:
  • Power factor 0.8
  • Nr. Of phases: 3
  • Voltage: 380/400 / 415VAC
  • Static voltage adjustment: 1%
  • THD-V: <3%
  • Crest factor: 3: 1
  • Frequency: 50-60Hz
  • Overload: 125% for 10min, 150% for 30sec
  • Efficiency:> 94%
Storage temperature: -25 ° C to + 55 ° C
Operating temperature: 0 ° C - 40 ° C (20 ° C to 25 ° C recommended for a longer life)
Humidity: 0-95% (no concealment)
Size: 56 * 82 * 128cm
Weight: 115Kg
Read more
2726.67 EUR VAT included
The product is in stock
Details
14
UPS Powersave Defender DSP 3315 15 kVa Online
  • Brand: Powersave
3 Phase Input & 3 Phase Output
IGBT Rectifier
Real Digital Signal Processor (DSP) Controlled Transformerless Design
Input Power Factor Correction PFC (>0,99)
Low Total Harmonic Distortion Level (THDi ?4%)
High Efficiency (up to 94%)
Wide Input Voltage Range
Generator Compatible Operation
Intelligent Battery Management System Extends The Lifetime of Batteries
Static and Manual Bypass
Optional Galvanic Isolation Transformer
Communication with Computers and Network Systems with SNMP availability
Expandable Battery Blocks
Low Installation and Operation Costs
Different Voltage applications with refer to country mains characteristic
EPO ( Emergency Power Off)
50/60 Hz Frequency Converter Version is Avaliable According to Request

Technical data
Power 15kVA
Nominal Active Power 12kW
Input
  • Nr. Phase: 3 phases + N + E
  • Voltage rating: 380/400 / 415VAC
  • Voltage range (100% load) 176 / 280VAC
  • Frequency: 50 / 60Hz
Output:
  • Power factor 0.8
  • Nr. Of phases: 3
  • Voltage: 380/400 / 415VAC
  • Static voltage adjustment: 1%
  • THD-V: <3%
  • Crest factor: 3: 1
  • Frequency: 50-60Hz
  • Overload: 125% for 10min, 150% for 30sec
  • Efficiency:> 94%
Storage temperature: -25 ° C to + 55 ° C
Operating temperature: 0 ° C - 40 ° C (20 ° C to 25 ° C recommended for a longer life)
Humidity: 0-95% (no concealment)
Size: 56 * 82 * 128cm
Weight: 120Kg
Read more
3222.46 EUR VAT included
The product is in stock
Details
15
UPS Powersave Defender DSP 3320 20 kVa Online
  • Brand: Powersave
3 Phase Input & 3 Phase Output
IGBT Rectifier
Real Digital Signal Processor (DSP) Controlled Transformerless Design
Input Power Factor Correction PFC (>0,99)
Low Total Harmonic Distortion Level (THDi ?4%)
High Efficiency (up to 94%)
Wide Input Voltage Range
Generator Compatible Operation
Intelligent Battery Management System Extends The Lifetime of Batteries
Static and Manual Bypass
Optional Galvanic Isolation Transformer
Communication with Computers and Network Systems with SNMP availability
Expandable Battery Blocks
Low Installation and Operation Costs
Different Voltage applications with refer to country mains characteristic
EPO ( Emergency Power Off)
50/60 Hz Frequency Converter Version is Avaliable According to Request

Technical data
Power 20kVA
Nominal output power 16kW
Input
  • Nr. Phase: 3 phases + N + E
  • Voltage rating: 380/400 / 415VAC
  • Voltage range (100% load) 176 / 280VAC
  • Frequency: 50 / 60Hz
Output:
  • Power factor 0.8
  • Nr. Of phases: 3
  • Voltage: 380/400 / 415VAC
  • Static voltage adjustment: 1%
  • THD-V: <3%
  • Crest factor: 3: 1
  • Frequency: 50-60Hz
  • Overload: 125% for 10min, 150% for 30sec
  • Efficiency:> 94%
Storage temperature: -25 ° C to + 55 ° C
Operating temperature: 0 ° C - 40 ° C (20 ° C to 25 ° C recommended for a longer life)
Humidity: 0-95% (no concealment)
Size: 56 * 82 * 128cm
Weight: 120Kg
Read more
3393.98 EUR VAT included
The product is in stock
Details
16
UPS Powersave Defender DSP 3330 30 kVa Online
  • Brand: Powersave
3 Phase Input & 3 Phase Output
IGBT Rectifier
Real Digital Signal Processor (DSP) Controlled Transformerless Design
Input Power Factor Correction PFC (>0,99)
Low Total Harmonic Distortion Level (THDi ?4%)
High Efficiency (up to 94%)
Wide Input Voltage Range
Generator Compatible Operation
Intelligent Battery Management System Extends The Lifetime of Batteries
Static and Manual Bypass
Optional Galvanic Isolation Transformer
Communication with Computers and Network Systems with SNMP availability
Expandable Battery Blocks
Low Installation and Operation Costs
Different Voltage applications with refer to country mains characteristic
EPO ( Emergency Power Off)
50/60 Hz Frequency Converter Version is Avaliable According to Request

Technical data
Power 30kVA
Active power 24kW
Input
  • Nr. Phase: 3 phases + N + E
  • Voltage rating: 380/400 / 415VAC
  • Voltage range (100% load) 176 / 280VAC
  • Frequency: 50 / 60Hz
Output:
  • Power factor 0.8
  • Nr. Of phases: 3
  • Voltage: 380/400 / 415VAC
  • Static voltage adjustment: 1%
  • THD-V: <3%
  • Crest factor: 3: 1
  • Frequency: 50-60Hz
  • Overload: 125% for 10min, 150% for 30sec
  • Efficiency:> 94%
Storage temperature: -25 ° C to + 55 ° C
Operating temperature: 0 ° C - 40 ° C (20 ° C to 25 ° C recommended for a longer life)
Humidity: 0-95% (no concealment)
Size: 56 * 82 * 128cm
Weight: 138Kg
Read more
3519.14 EUR VAT included
The product is in stock
Details
17
UPS Powersave Defender DSP 3340 40 kVa Online
  • Brand: Powersave
3 Phase Input & 3 Phase Output
IGBT Rectifier
Real Digital Signal Processor (DSP) Controlled Transformerless Design
Input Power Factor Correction PFC (>0,99)
Low Total Harmonic Distortion Level (THDi ?4%)
High Efficiency (up to 94%)
Wide Input Voltage Range
Generator Compatible Operation
Intelligent Battery Management System Extends The Lifetime of Batteries
Static and Manual Bypass
Optional Galvanic Isolation Transformer
Communication with Computers and Network Systems with SNMP availability
Expandable Battery Blocks
Low Installation and Operation Costs
Different Voltage applications with refer to country mains characteristic
EPO ( Emergency Power Off)
50/60 Hz Frequency Converter Version is Avaliable According to Request

Technical data
Power 40kVA
Nominal Active Power 32kW
Input
  • Nr. Phase: 3 phases + N + E
  • Voltage rating: 380/400 / 415VAC
  • Voltage range (100% load) 176 / 280VAC
  • Frequency: 50 / 60Hz
Output:
  • Power factor 0.8
  • Nr. Of phases: 3
  • Voltage: 380/400 / 415VAC
  • Static voltage adjustment: 1%
  • THD-V: <3%
  • Crest factor: 3: 1
  • Frequency: 50-60Hz
  • Overload: 125% for 10min, 150% for 30sec
  • Efficiency:> 94%
Storage temperature: -25 ° C to + 55 ° C
Operating temperature: 0 ° C - 40 ° C (20 ° C to 25 ° C recommended for a longer life)
Humidity: 0-95% (no concealment)
Size: 56 * 82 * 128cm
Weight: 140Kg
Read more
3949.03 EUR VAT included
The product is in stock
Details
18
UPS Powersave Defender 3120L 20kVA Online
  • Brand: Powersave
Online Double Conversion Technology
3 Phase Input & 1 Phase Output
High Frequency and True Double-Conversion
DSP Digital Control Technology
Wide Input Voltage Range (110V-300V)
Output Power Factor 0.9
Optimized Battery Configuration 192V/240V
Cold Start
50/60 Hz Frequency Adaptive
ECO Mode Operation For Energy Saving
50/60Hz Frequency Converter Mode
Selectable Output Voltage via LCD
Selectable Battery Shutdown Voltage (EOD) via LCD
Selectable Input Mode LCD (3/1 or 1/1)
Advanced Battery Management (ABM)
Short Circuit and Overload Protection
Automatically Charging Battery at UPS Off Mode
Auto Control Fan Speed
Standard RS232 Communication Port

Technical data:
Capacity: 10KVA / 9KW
Input
  • Nominal voltage:
    • 3/1: 360/380/400 / 415VAC
    • 1/1: 208/220/230 / 240VAC
  • Voltage range:
    • 3/1: half load (190-520) +/- 5VAC full load (277-520) +/- 5VAC
    • 1/1: half load (110-300) +/- 5VAC full load (160-300) +/- 5VAV
  • Frequency: 40-70Hz +/- 0.5% (auto-sensing)
  • Power factor: 3/1 ≥0.95, 1/1 ≥0.99
  • bypass
  • Voltage range: 160V nominal output voltage + 32V
  • Frequency: 50 / 60Hz +/- 5Hz
Output
  • Voltage: 208/220/230 / 240VAC (LCD setting)
  • Voltage regulation: +/- 1%
  • Frequency: Synchronized on AC, 50 / 60Hz on battery
  • Wave: pure sinus
  • Crest factor: 3: 1
Efficiency
AC Mode> 93%
Mod battery> 92%
ECO mode> 98%
Size: 262 * 580 * 628mm
Weight: 40Kg
Read more
1400.52 EUR VAT included
The product is in stock
Details
19
UPS Powersave Online Double Conversion 6kVA PA-6000 Poweractive
  • Brand: Powersave
Online Double Conversion Technology

DSP Digital Control Technology
Output Power Factor 0.9
Input PFC
Selectable Charging Current For 6 & 10 kVA (1-3-5-8 Amp)
Green Environment-Friendly Model
Wide Input Voltage Range
Perfect Protection
Cold Start and Mains Power Start Function
Generator Compatibility
Zero Switching
Intelligent Battery Management
Friendly Interface

Capacity 6kVA / 5.4kW
Input Voltage: 208/220/230 / 240VAC
Voltage range: half load (115-295VAC) +/- 5VAC; Full load (165-295) +/- 5VAC
Frequency: 40-70Hz +/- 5%
Power factor> 0.99
The bypass voltage range: 160V nominal output power + 32V

Output voltage: 208/220/230 / 240VAC settable by LCD
Voltage regulation +/- 1%
Wave: pure sinus
Crest factor 3: 1
Voltage DC battery: 192V
Batteries: 16 * 7Ah
Humidity: 20-90% at 0˚C - 40˚C
Noise: <55dB
Dimensions: 262 * 514 * 735mm
Weight: 67Kg
Read more
791.86 EUR VAT included
The product is in stock
Details
20
UPS Powersave Online Double Conversion 10kVA PA-10000 Poweractive
  • Brand: Powersave
Online Double Conversion Technology

DSP Digital Control Technology
Output Power Factor 0.9
Input PFC
Selectable Charging Current For 6 & 10 kVA (1-3-5-8 Amp)
Green Environment-Friendly Model
Wide Input Voltage Range
Perfect Protection
Cold Start and Mains Power Start Function
Generator Compatibility
Zero Switching
Intelligent Battery Management
Friendly Interface

Capacity 10kVA / 9kW
Input Voltage: 208/220/230 / 240VAC
Voltage range: half load (115-295VAC) +/- 5VAC; Full load (165-295) +/- 5VAC
Frequency: 40-70Hz +/- 5%
Power factor> 0.99
Bypass voltage range: 160V nominal output power + 32V

Output voltage: 208/220/230 / 240VAC settable by LCD
Voltage regulation +/- 1%
Wave: pure sinus
Crest factor 3: 1
Voltage DC battery: 192V
Batteries: 16 * 9Ah
Humidity: 20-90% at 0˚C - 40˚C
Noise: <55dB
Dimensions: 262 * 514 * 735mm
Weight: 75Kg
Read more
1035.73 EUR VAT included
The product is in stock
Details
21
Polycrystalline solar panel 10Wp BLD10-36P
  • Brand: Powersave
The polycrystalline solar module BLD10-36P with a nominal power of 10 watts is suitable due to its low nominal voltage of 17.5 V excellently charging 12 volts batteries and in series connected also for 24 Volt batteries.
The preVent solar module consists of different laminated layers. At the bottom is a white plastic backside, a double-sided adhesive film, the actual doped wafer, a double-sided adhesive film and then a specially hardened glass surface. The individual components are pressed together under pressure and temperature.As a result, the back and front sides are very well protected against the penetration of moisture.

Module type 10-36P - BLD
Max. Power (Pmax) 10 W
Max. Voltage (Vmp) 17.5V
Max. Current (imp) 0.58 A
Open circuit voltage (Voc) 21.6V
Short circuit current (Isc) 0.65 A
Dimensions 350 x 271 x 17 mm
Mass 1 kg
Frame color anodised silver
Read more
19.95 EUR VAT included
The product is in stock
Details
22
Polycrystalline solar panel 20Wp BLD20-36P
  • Brand: Powersave
The polycrystalline solar module BLD20-36P with a nominal power of 20 watts is suitable due to its low nominal voltage of 17.5 V excellently charging 12 volts batteries and in series connected also for 24 Volt batteries.
The preVent solar module consists of different laminated layers. At the bottom is a white plastic backside, a double-sided adhesive film, the actual doped wafer, a double-sided adhesive film and then a specially hardened glass surface. The individual components are pressed together under pressure and temperature.As a result, the back and front sides are very well protected against the penetration of moisture

Module type 20-36P - BLD
Max. Power (Pmax) 20 W
Max. Voltage (Vmp) 17.5V
Max. Current (imp) 1.15 A
Open circuit voltage (Voc) 21.6V
Short circuit current (Isc) 1.3A
Dimensions 476 x 350 x 25 mm
Mass 2 kg
Possibility to connect the module Can with clamps
Frame color anodised silver
Read more
31.24 EUR VAT included
The product is in stock
Details
23
Monocrystalline solar panel 30Wp BLD30-36M
  • Brand: Powersave
Technical specifications
 
Type PV-30-M-36
Peak power (Pmax) 30 W
Power tolerance 0 ~ 3%
Open circuit voltage (Voc) 22.5 volts
Max. Working voltage (Vmpp) 18.4 volts
Short circuit current (Isc) 1.83 A
Max. shunt 1.64 A
Max. system voltage DC 1000 V
Working temperatures -40 ° C ~ + 80 ° C
Dimensions 620 x 355 x 30 mm
Mass 2.68 kg
Data under standardized test conditions (STC) AM = 1.5 E = 1000W / m² Tc = 25 ° C
Application class A
Corresponds to standards
IEC / EN 61215: 2005;
IEC / EN 61730-1 A2
IEC / EN 61730-2 A1
Read more
53.41 EUR VAT included
The product is in stock
Details
24
Photovoltaic System Off-grid 1kw
  • Brand: Powersave
Off grid systems with battery power storage.

The system consists of:
- 4 x 260W BenQ polycrystalline panel
- 1 x Inverter 1000VA / 24
- 1 x MPPT 40A controller
- 2 x Battery UCG200-12
- 1 x Tilt roof system
- 20 x 6mm solar cable
- Small items (sockets, fuses, etc.)
Read more
2740.00 EUR VAT included
The product is in stock
Details

Compara produse

You must add at least one product to compare products.

Was added to wishlist!

Was removed from wishlist!