Our smallest wallbox with 22 kW for charging electric vehicles at home, company parking lots and on the road with built-in type 2 socket and CEE red 32 A plug for direct connection to the corresponding three-phase socket.
The go-eCharger HOME+ 22 kW is a wallbox for charging electric vehicles, which can also be transformed into a mobile charging station in a few seconds. It is suitable for garages and outdoor parking areas, e.g. in front of residential buildings and companies (without selling charging current). The charger can be connected directly to an existing CEE 32 A three-phase socket or to other sockets via an adapter.
Charging power adjustable between 1.4 kW and 22 kW [depending on the number of phases (1-, 2- or 3-phase) and selected amperes (adjustable in 1 ampere steps between 6 A and 32 A)]
Connection on vehicle side:
CEE red 32 A (three-phase)
With optional adapters (not included in delivery):
CEE red 16 A (three-phase)
CEE blue 16 A (single-phase)
CEE blue 32 A (single-phase)
multiple domestic plugs 16 A (household socket outlet)
Connection on vehicle side:
Type 2 socket, own type 2 cable required (not included in delivery)
Locking device (theft protection)
Vehicles with type 1 can be charged with adapter cable
Ampere and charging status readable via LED ring or app
Charging power adjustable via button and app
Safety functions:
RFID access control
RCD protection device with DC detection, 30 mA AC, 6 mA DC
Phase and voltage test of the input voltage
Phase test after contactor
Current sensor three-phase
Ground check (switchable grounding monitoring)
Customer replaceable fine fuse for internal electronics (triggers if the supply line is connected incorrectly)
Adapter detection with automatic reduction to 16 A
IP54 - Protection against dirt and water, suitable for permanent outdoor use
go-e network operator API for authorised access of the electricity network operator to the go-eCharger for network related power control
App and connectivity:
Local (WLAN hotspot) or worldwide (via home WLAN) usable
The RFID tags allow you to authorize and personalize the load on your go-eCharger. For example, you can assign an account to each day and view the kWh loaded via the account.
Please note that you need to set up the go-eCharger via App to use these functions.
Adapter set with the three most important adapter cables for the go-eCharger HOME+ 22 kW with 32 A CEE red plug (three-phase current) The built-in adapter recognition system, in combination with the go-eCharger HOME+ 22 kW, automatically reduces the charging current to 16 A.
The set includes adapters for the following sockets:
Charging power: max. 3.7 kW (230 V, 16 A) | 2.3 kW (with reduction to 230 V, 10 A)
Length: 120 cm
Attention: Not all household sockets are suitable for a charging current of 16 A. In case of doubt, we recommend to reduce the charging power manually to 10 A.
Our smallest wallbox with 22 kW for charging electric vehicles at home, company parking lots and on the road with built-in type 2 socket and CEE red 32 A plug for direct connection to the corresponding three-phase socket.
The go-eCharger HOME+ 22 kW is a wallbox for charging electric vehicles, which can also be transformed into a mobile charging station in a few seconds. It is suitable for garages and outdoor parking areas, e.g. in front of residential buildings and companies (without selling charging current). The charger can be connected directly to an existing CEE 32 A three-phase socket or to other sockets via an adapter.
Charging power adjustable between 1.4 kW and 22 kW [depending on the number of phases (1-, 2- or 3-phase) and selected amperes (adjustable in 1 ampere steps between 6 A and 32 A)]
Connection on vehicle side:
CEE red 32 A (three-phase)
With optional adapters (not included in delivery):
CEE red 16 A (three-phase)
CEE blue 16 A (single-phase)
CEE blue 32 A (single-phase)
multiple domestic plugs 16 A (household socket outlet)
Connection on vehicle side:
Type 2 socket, own type 2 cable required (not included in delivery)
Locking device (theft protection)
Vehicles with type 1 can be charged with adapter cable
Ampere and charging status readable via LED ring or app
Charging power adjustable via button and app
Safety functions:
RFID access control
RCD protection device with DC detection, 30 mA AC, 6 mA DC
Phase and voltage test of the input voltage
Phase test after contactor
Current sensor three-phase
Ground check (switchable grounding monitoring)
Customer replaceable fine fuse for internal electronics (triggers if the supply line is connected incorrectly)
Adapter detection with automatic reduction to 16 A
IP54 - Protection against dirt and water, suitable for permanent outdoor use
go-e network operator API for authorised access of the electricity network operator to the go-eCharger for network related power control
App and connectivity:
Local (WLAN hotspot) or worldwide (via home WLAN) usable