Off grid systems with battery power storage.

The system consists of:
- 16 x 260W BenQ polycrystalline panel
- 1 x Inverter MKS Plus 5k-48, MPPT 60A
- 4 x Battery UCG200-12
- 1 x Tilt roof system
- 40 x 6mm solar cable
- Small items (sockets, fuses, etc.)

The system includes:

• 100W photovoltaic panel
• Controller 10A
• Inverter pur sinus 500W
• 100A gel battery
• 4200 mm bar
• 2 x clamping system 10x160
• 4 x fixing elements
• kit electric

Solar Monocrystalline Panel 12V 100W

• Monocrystalline solar cells
• 2 by-pass diodes in the socket to minimize the voltage drop
• Anodised aluminum frame
• Special ESG solar glass reinforced
• Very resistant to environmental influences
• Perfect for 12 V systems

Technical specifications:

• Max power (Pmax): 100 W
• Tolerance: 0-3%
• Open Voltage (Voc): 22.8 volts
• Maximum working voltage (Vmpp): 18.5 volts
• Short circuit current (Isc): 5.73 amps
• Maximum working current: 5.41 Amps
• Maximum system voltage: 1000 VDC
• Working temperatures: -40 ° C to + 80 ° C
• Dimensions: 1000 x 680 x 35 mm
• Weight: 9.4 kg
• Tested in accordance with the standards: IEC / EN 61215: 2005; IEC / EN 61730-1 A2; IEC / EN 61730-2 A1

Solar charge controller Powersave PWM 10A 12/24V

• Rated current 10A
• System voltage Automatic recognition of 12 V/ 24 V
• No-load loss < 10mA/12V；< 12mA/24V
• Max. Solar energy input voltage <55V
• Max. voltage at the battery end <35V
• Overvoltage protection 17.0V；×2/24V；
• Equalizing charging voltage 14.6V；×2/24V；
• Boost charging voltage 14.4V；×2/24V；
• Floating charging voltage 13.8V；×2/24V；
• Charging recovery voltage 13.2V；×2/24V；
• Over-discharge recovery voltage 12.6V；×2/24V；
• Over-discharge voltage 11.1V；×2/24V；
• Equalizing charging interval 30days
• Equalizing charging time 1H
• Boost charging time 2H
• Temperature compensation -3.0mV/℃/2V
• Light control voltage
  • Light control on 5V, ×2/24V； 
  • Light control off 6V, ×2/24V；
• Light control judgment time 1minute
• Operating temperature -25℃ to +55℃；
• IP protection degree IP30
• Net  weight 100g
• Protection functions 
  • Solar panel short circuit and reverse-connection protection
  • Over-temperature, overload and short circuit protection
• Dimensions 103×71×36(mm)

Inverter Poweracu Pur Sinus 500W 12V

• Pure sine wave output (THD＜3%)
• Soft-start technology.
• High efficiency-converts the battery’s available power
• 100% sufficient power.
• Aluminum shell with good heat dissipation and strong shock resistance.
• Optional Crocodile clip and cigar lighters,easy to connect batteries or vehicles’ batteries.
• USB charging port: 5V ,ideally qualified for powering your phone,laptop,etc.
• LED indicators for power and protections.
• Switch-mode design, easy to use.
• Intelligent fan for cooling,long use life.
• OEM and ODM are available, shell color can be customized.
• Optional remote control and LED display for 800W-6000W inverters.

Protection Functions: Over load protection, Over temperature protection, Over voltage protection, Low voltage protection, Short circuit protection, Revers polarity protection.

• Rated power 500W
• Peak power 1000W
• Input voltage DC12V
• Output voltage 220VAC or 230VAC or 240VAC±5%
• Unload current less than 0.6A
• Output frequency 50Hz±0.5Hz or 60Hz±0.5Hz
• Output waveform Pure Sine Wave
• Waveform distortion THD＜3%(Linear load)
• USB port 5V 1A
• Max.efficiency 90%
• Input voltage range 10-15.5V
• Low voltage alarm 10.5±0.5V
• Low voltage protection 10±0.5V 
• Over voltage protection 15.5±0.5V
• Low voltage recover 13±0.5V 
• Over voltage recover 14.8V±0.5V
• Protection function Low voltage Alarm at first, voltage continously reduce. LED Red light on & shut sown., Over voltage LED Red light on, shut down, Over load LED Red light on, shut down, Over temperature Alarm at first, tempurature continously rise.LED Red light on & shut sown, Short circuit LED Red light on, Input reverse polarity Fuse burn-out
• Working temperature -10°C - +50°C
• Storage temperature -30°C - +70°C
• Dimension(mm) 244x112x67mm
• Net./gross weight(g) 1197/1479g
• Cooling method Intelligent air cooling

VRLA Battery ULTRACELL 12 V 100 Ah

• Has a longer discharge time compared to other batteries. 
• Its special plate design increases the life cycle of the battery especially in warmer temperatures.
• A special separator within the battery can boost its performance.
• Length: 328 ± 2 mm 
• Width: 173 ± 2 mm 
• Container Height: 212 ± 2 mm 
• Total Height (with terminal): 232 ± 2 mm 
• Approx Weight: Approx 30.4 kg 

Off grid systems with battery power storage.

The system consists of:
- 27 Panel 260W BenQ polycrystalline
- 1x Inverter MKS Plus Tri 5k-48, MPPT 60A
- 8 x Battery UCG200-12
- Tilt roof system
- 60 x 6mm solar cable
- Small items (sockets, fuses, etc.)

The system includes:

• 2 x 100W photovoltaic panel
• Controller 20A
• Inverter pur sinus 500W
• 100A gel battery
• 4200 mm bar
• 4 x clamping system 10x160
• 6 x fixing elements
• kit electric

Solar Monocrystalline Panel 12V 100W

• Monocrystalline solar cells
• 2 by-pass diodes in the socket to minimize the voltage drop
• Anodised aluminum frame
• Special ESG solar glass reinforced
• Very resistant to environmental influences
• Perfect for 12 V systems

Technical specifications:

• Max power (Pmax): 100 W
• Tolerance: 0-3%
• Open Voltage (Voc): 22.8 volts
• Maximum working voltage (Vmpp): 18.5 volts
• Short circuit current (Isc): 5.73 amps
• Maximum working current: 5.41 Amps
• Maximum system voltage: 1000 VDC
• Working temperatures: -40 ° C to + 80 ° C
• Dimensions: 1000 x 680 x 35 mm
• Weight: 9.4 kg
• Tested in accordance with the standards: IEC / EN 61215: 2005; IEC / EN 61730-1 A2; IEC / EN 61730-2 A1

Powersave PWM 20A 12 / 24V Solar Controller

• 12V / 24 V system voltages are automatically recognized.
• an upgrade of the 3-step PWM load algorithm is adopted. Applying a battery charging equalization, either periodically or when downloaded, can effectively prevent the non-equalizing and sulfurizing battery, thus extending the life of the battery.
• with the compensation of the used temperature, the load parameters can be adjusted automatically.
• the product offers overload protection, overload, overload, and short-circuit protection.
• by virtue of an advanced startup method, large capacity loads can be started without problems.
• LCD screen and a man-machine interface with a key.
• user-friendly browser design and dynamic interfaces provide convenient and intuitive operation.
• TVS protection at switchboard.
• Rated current 20A
• Current display function Yes
• No loss load <10mA / 12V; <12mA / 24V
• Max. solar energy input voltage <55V
• Max. Battery voltage at <35V
• Overvoltage protection 17.0V; × 2 / 24V;
• 13.2V recovery charge voltage; × 2 / 24V;
• 12.6 V recovery overload discharge overload; × 2 / 24V;
• Overload discharge 11.1V; × 2 / 24V;
• Equalizing 30 day loading interval
• Equalizing loading time 1 H
• Boost load time 2H
• Temperature compensation -3.0mV / ℃ / 2V
• Operating temperature -25 ℃ to + 55 ℃;
• Weight 160g
• Size: 130 × 75 × 38 (mm)

Inverter Poweracu Pur Sinus 500W 12V

• Pure sine wave output (THD＜3%)
• Soft-start technology.
• High efficiency-converts the battery’s available power
• 100% sufficient power.
• Aluminum shell with good heat dissipation and strong shock resistance.
• Optional Crocodile clip and cigar lighters,easy to connect batteries or vehicles’ batteries.
• USB charging port: 5V ,ideally qualified for powering your phone,laptop,etc.
• LED indicators for power and protections.
• Switch-mode design, easy to use.
• Intelligent fan for cooling,long use life.
• OEM and ODM are available, shell color can be customized.
• Optional remote control and LED display for 800W-6000W inverters.

Protection Functions: Over load protection, Over temperature protection, Over voltage protection, Low voltage protection, Short circuit protection, Revers polarity protection.

• Rated power 500W
• Peak power 1000W
• Input voltage DC12V
• Output voltage 220VAC or 230VAC or 240VAC±5%
• Unload current less than 0.6A
• Output frequency 50Hz±0.5Hz or 60Hz±0.5Hz
• Output waveform Pure Sine Wave
• Waveform distortion THD＜3%(Linear load)
• USB port 5V 1A
• Max.efficiency 90%
• Input voltage range 10-15.5V
• Low voltage alarm 10.5±0.5V
• Low voltage protection 10±0.5V 
• Over voltage protection 15.5±0.5V
• Low voltage recover 13±0.5V 
• Over voltage recover 14.8V±0.5V
• Protection function Low voltage Alarm at first, voltage continously reduce. LED Red light on & shut sown., Over voltage LED Red light on, shut down, Over load LED Red light on, shut down, Over temperature Alarm at first, tempurature continously rise.LED Red light on & shut sown, Short circuit LED Red light on, Input reverse polarity Fuse burn-out
• Working temperature -10°C - +50°C
• Storage temperature -30°C - +70°C
• Dimension(mm) 244x112x67mm
• Net./gross weight(g) 1197/1479g
• Cooling method Intelligent air cooling

VRLA Battery ULTRACELL 12 V 100 Ah

• Has a longer discharge time compared to other batteries. 
• Its special plate design increases the life cycle of the battery especially in warmer temperatures.
• A special separator within the battery can boost its performance.
• Length: 328 ± 2 mm 
• Width: 173 ± 2 mm 
• Container Height: 212 ± 2 mm 
• Total Height (with terminal): 232 ± 2 mm 
• Approx Weight: Approx 30.4 kg 

Off grid systems with battery power storage.

The system consists of:
- 27 x 260W BenQ polycrystalline panel
- 1 x Invertor MKS Plus Tri 5k-48, MPPT 60A
- 1 x LifePpo 100A 48V 4.8kW battery
- Tilt roof system
- 60 x 6mm solar cable
- Small items (sockets, fuses, etc.)

Off grid systems with battery power storage.

The system consists of:
- 20 x 260W BenQ polycrystalline panel
- 1 x Inverter MKS Plus 5k-48, MPPT 60A
- 1 x Battery LifePpo 100A 48V 4.8kW
- Tilt roof system
- 50 x 6mm solar cable
- Small items (sockets, fuses, etc.)

The system includes:

• 3 x 100W photovoltaic panel
• Controller 20A
• Inverter pur sinus 500W
• 100A gel battery
• 2 x 4200 mm bar
• 8 x clamping system 10x160
• 8 x fixing elements
• kit electric

Solar Monocrystalline Panel 12V 100W

• Monocrystalline solar cells
• 2 by-pass diodes in the socket to minimize the voltage drop
• Anodised aluminum frame
• Special ESG solar glass reinforced
• Very resistant to environmental influences
• Perfect for 12 V systems

Technical specifications:

• Max power (Pmax): 100 W
• Tolerance: 0-3%
• Open Voltage (Voc): 22.8 volts
• Maximum working voltage (Vmpp): 18.5 volts
• Short circuit current (Isc): 5.73 amps
• Maximum working current: 5.41 Amps
• Maximum system voltage: 1000 VDC
• Working temperatures: -40 ° C to + 80 ° C
• Dimensions: 1000 x 680 x 35 mm
• Weight: 9.4 kg
• Tested in accordance with the standards: IEC / EN 61215: 2005; IEC / EN 61730-1 A2; IEC / EN 61730-2 A1

Powersave PWM 20A 12 / 24V Solar Controller

• 12V / 24 V system voltages are automatically recognized.
• an upgrade of the 3-step PWM load algorithm is adopted. Applying a battery charging equalization, either periodically or when downloaded, can effectively prevent the non-equalizing and sulfurizing battery, thus extending the life of the battery.
• with the compensation of the used temperature, the load parameters can be adjusted automatically.
• the product offers overload protection, overload, overload, and short-circuit protection.
• by virtue of an advanced startup method, large capacity loads can be started without problems.
• LCD screen and a man-machine interface with a key.
• user-friendly browser design and dynamic interfaces provide convenient and intuitive operation.
• TVS protection at switchboard.
• Rated current 20A
• Current display function Yes
• No loss load <10mA / 12V; <12mA / 24V
• Max. solar energy input voltage <55V
• Max. Battery voltage at <35V
• Overvoltage protection 17.0V; × 2 / 24V;
• 13.2V recovery charge voltage; × 2 / 24V;
• 12.6 V recovery overload discharge overload; × 2 / 24V;
• Overload discharge 11.1V; × 2 / 24V;
• Equalizing 30 day loading interval
• Equalizing loading time 1 H
• Boost load time 2H
• Temperature compensation -3.0mV / ℃ / 2V
• Operating temperature -25 ℃ to + 55 ℃;
• Weight 160g
• Size: 130 × 75 × 38 (mm)

Inverter Poweracu Pur Sinus 500W 12V

• Pure sine wave output (THD＜3%)
• Soft-start technology.
• High efficiency-converts the battery’s available power
• 100% sufficient power.
• Aluminum shell with good heat dissipation and strong shock resistance.
• Optional Crocodile clip and cigar lighters,easy to connect batteries or vehicles’ batteries.
• USB charging port: 5V ,ideally qualified for powering your phone,laptop,etc.
• LED indicators for power and protections.
• Switch-mode design, easy to use.
• Intelligent fan for cooling,long use life.
• OEM and ODM are available, shell color can be customized.
• Optional remote control and LED display for 800W-6000W inverters.

Protection Functions: Over load protection, Over temperature protection, Over voltage protection, Low voltage protection, Short circuit protection, Revers polarity protection.

• Rated power 500W
• Peak power 1000W
• Input voltage DC12V
• Output voltage 220VAC or 230VAC or 240VAC±5%
• Unload current less than 0.6A
• Output frequency 50Hz±0.5Hz or 60Hz±0.5Hz
• Output waveform Pure Sine Wave
• Waveform distortion THD＜3%(Linear load)
• USB port 5V 1A
• Max.efficiency 90%
• Input voltage range 10-15.5V
• Low voltage alarm 10.5±0.5V
• Low voltage protection 10±0.5V 
• Over voltage protection 15.5±0.5V
• Low voltage recover 13±0.5V 
• Over voltage recover 14.8V±0.5V
• Protection function Low voltage Alarm at first, voltage continously reduce. LED Red light on & shut sown., Over voltage LED Red light on, shut down, Over load LED Red light on, shut down, Over temperature Alarm at first, tempurature continously rise.LED Red light on & shut sown, Short circuit LED Red light on, Input reverse polarity Fuse burn-out
• Working temperature -10°C - +50°C
• Storage temperature -30°C - +70°C
• Dimension(mm) 244x112x67mm
• Net./gross weight(g) 1197/1479g
• Cooling method Intelligent air cooling

VRLA Battery ULTRACELL 12 V 100 Ah

• Has a longer discharge time compared to other batteries. 
• Its special plate design increases the life cycle of the battery especially in warmer temperatures.
• A special separator within the battery can boost its performance.
• Length: 328 ± 2 mm 
• Width: 173 ± 2 mm 
• Container Height: 212 ± 2 mm 
• Total Height (with terminal): 232 ± 2 mm 
• Approx Weight: Approx 30.4 kg 

The system includes:

• 2 x 250W photovoltaic panel
• Inverter 3kva-24 PWM
• 2 x 150A gel batteries
• 3 x 4200 mm bar
• 15 x clamping system 10x160
• 15 x fixing elements
• kit electric

Photovoltaic panel 250W
It is a robust photovoltaic panel made up of 60 solar cells.
It stands out with its high efficiency of up to 16.40% and output power tolerance of 1.6%.
Electrical features

• Maximum power (Pmax) 254.99W
• Maximum voltage (Vmp) 31.62V
• Maximum Intensity (Imp) 8.37A
• Vacuum Voltage (Voc) 37.98V
• Short circuit current (Isc) 8.903A
• Efficiency of encapsulated cells (ᶇ%) 18.1%
• Module efficiency (%) 16.4%
• Power tolerance at module output + 0 ... 5W

* Values ​​for testing under standard STC (AM 1.5, 1000W / m2, cell temperature 25 ° C)
 Mechanical features

• Solar cells Polycrystalline silicon 156mm x 156mm (6 inches)
• Number of serial numbers 60 (6 × 10)
• Dimensions 1657mm x 998mm x 38mm
• Weight 18.1kg
• 3.2mm heat-shielding glass / prismatic structure
• Frame Anodised aluminum
• Tyco Solarlok Z - Rail Junction Box, 115mm x 110mm x 23mm
• Protection against moisture and dust IP65
• 4.0mm² connecting cables, symmetric lengths for connector (+) and (-), 1000mm
• Connectors Compatible with MC4, size 70mm
• Resistance to external winds - 200km / h, snow - 550kg / m², hail - 80km / h for 25mm
• Warranty 10 years
• Efficient warranty over 90% in the first 12 years; over 80% up to 25 years

 Operating and storage parameters

• Operating temperature between -40º and 85ºC
• Storage temperature between -40º and 85ºC
• Breaking voltage 1000VDC (IEC)
• Fuse protection 20A

 Temperature characteristics

• Nominal cell operating temperature 45º +/- 2ºC
• Current coefficient (% k) 0.0473
• Coefficient of voltage (% k) -0.3166
• Power factor (% k) -0.397

Inverter Pur Sinus PWM3000-24 3000VA 2400W 24V

• Solar inverter with pure sinusoidal wave
• High power load, selectable
• Wide range of DC input
• Selective input voltage range for household appliances and personal computers
• AC / Solar Input Configurable by setting the LCD.
• Compatible with network voltage or generator power
• Automatic restart while AC is being recovered
• Overload and short circuit protection
• Intelligent charger design to optimize battery performance
• Cold start function

Nominal power 3000VA / 2400W
ENTRY

• Voltage 230 VAC
• Selective voltage range 170-280 VAC (for personal computers); 90-280 VAC (for home appliances)
• Frequency range 50 Hz / 60 Hz (automatic detection)

OUTPUT

• AC voltage adjustment (Batt mode) 230 VAC ± 5%
• Power source 6000VA
• Efficiency (peak) 90% ~ 93%
• 10 ms transfer time (for personal computers); 20 ms (for home appliances)
• Form of pure sinusoidal wave

BATTERY

• Battery voltage 24 VDC
• Variable load voltage 27 VDC
• Overload 33 VDC

Solar Charger and AC Charger
PWM solar charger
Max. Open circuit voltage at 80 VDC PV terminal
Max. Power PV Array 1200 W
Max. Solar charging current 50 A
Max. AC charging current 25 A
Max. Load current 70 A
PHYSICAL

• Dimensions, L x W x H (mm) 100 x 334 x 285
• Net weight (kg) 6.5
• USB / RS232 communication interface

ENVIRONMENT

• Humidity Relative humidity 5% to 95% (no condensation)
• Operating temperature -10 ° C to 50 ° C
• Storage temperature -15 ° C to 60 ° C

VRLA Ultracell battery with GEL 12V, 150Ah UCG150-12
Life span: up to 10 years
Norms: ISO 9001
Technology: VRLA GEL
Electrolyte: H2SO4 GEL
Plates: Planar 3D Alloys: PbCaSn
Connectors: silver copper alloy
Loading temperature: 0°C and 40°C
Discharge temperature: -15°C to 50°C.
Storage temperature: -15°C to 40°C
Load current: less than 45A
Max Cyclic Voltage: 14.4V at 15V
Maximum standby voltage: 13.6 V at 13.8V
Max discharge: 1500 A (5s)
Internal resistance: 2.5 MOhm
Capacity at 25 °:
160Ah en C20 to 1.80V / cell
150Ah en C20 at 1.80V / cell
131Ah en C5 to 1.75 / cell
119Ah en C3 at 1.75 / cell
97Ah en C1 to 1.60V / Cell
Length: 485 mm Depth: 170 mm Height: 240 mm Max. Height: 240 mm
Weight: 44 kg

The system consists of:
- 31 x 260W BenQ polycrystalline panel
- 1x Inverter 10kW
- 8 x Battery UCG200-12
- Tilt roof system
- 70 x 6mm solar cable
- Small items (sockets, fuses, etc.)

Off grid systems with battery power storage.

The system consists of:
- 24 x 260W BenQ polycrystalline panel
- 1x Invertor MKS Plus 5k-48, MPPT 60A
- 8 x Battery UCG200-12
- Tilt roof system
- 60 x 6mm solar cable
- Small items (sockets, fuses, etc.)

The system includes:

• 4 x 100W photovoltaic panel
• Controller 20A
• Inverter pur sinus 500W
• 100A gel battery
• 3 x 4200 mm bar
• 10 x clamping system 10x160
• 12 x fixing elements
• kit electric

Solar Monocrystalline Panel 12V 100W

• Monocrystalline solar cells
• 2 by-pass diodes in the socket to minimize the voltage drop
• Anodised aluminum frame
• Special ESG solar glass reinforced
• Very resistant to environmental influences
• Perfect for 12 V systems

Technical specifications:

• Max power (Pmax): 100 W
• Tolerance: 0-3%
• Open Voltage (Voc): 22.8 volts
• Maximum working voltage (Vmpp): 18.5 volts
• Short circuit current (Isc): 5.73 amps
• Maximum working current: 5.41 Amps
• Maximum system voltage: 1000 VDC
• Working temperatures: -40 ° C to + 80 ° C
• Dimensions: 1000 x 680 x 35 mm
• Weight: 9.4 kg
• Tested in accordance with the standards: IEC / EN 61215: 2005; IEC / EN 61730-1 A2; IEC / EN 61730-2 A1

Powersave PWM 20A 12 / 24V Solar Controller

• 12V / 24 V system voltages are automatically recognized.
• an upgrade of the 3-step PWM load algorithm is adopted. Applying a battery charging equalization, either periodically or when downloaded, can effectively prevent the non-equalizing and sulfurizing battery, thus extending the life of the battery.
• with the compensation of the used temperature, the load parameters can be adjusted automatically.
• the product offers overload protection, overload, overload, and short-circuit protection.
• by virtue of an advanced startup method, large capacity loads can be started without problems.
• LCD screen and a man-machine interface with a key.
• user-friendly browser design and dynamic interfaces provide convenient and intuitive operation.
• TVS protection at switchboard.
• Rated current 20A
• Current display function Yes
• No loss load <10mA / 12V; <12mA / 24V
• Max. solar energy input voltage <55V
• Max. Battery voltage at <35V
• Overvoltage protection 17.0V; × 2 / 24V;
• 13.2V recovery charge voltage; × 2 / 24V;
• 12.6 V recovery overload discharge overload; × 2 / 24V;
• Overload discharge 11.1V; × 2 / 24V;
• Equalizing 30 day loading interval
• Equalizing loading time 1 H
• Boost load time 2H
• Temperature compensation -3.0mV / ℃ / 2V
• Operating temperature -25 ℃ to + 55 ℃;
• Weight 160g
• Size: 130 × 75 × 38 (mm)

Inverter Poweracu Pur Sinus 500W 12V

• Pure sine wave output (THD＜3%)
• Soft-start technology.
• High efficiency-converts the battery’s available power
• 100% sufficient power.
• Aluminum shell with good heat dissipation and strong shock resistance.
• Optional Crocodile clip and cigar lighters,easy to connect batteries or vehicles’ batteries.
• USB charging port: 5V ,ideally qualified for powering your phone,laptop,etc.
• LED indicators for power and protections.
• Switch-mode design, easy to use.
• Intelligent fan for cooling,long use life.
• OEM and ODM are available, shell color can be customized.
• Optional remote control and LED display for 800W-6000W inverters.

Protection Functions: Over load protection, Over temperature protection, Over voltage protection, Low voltage protection, Short circuit protection, Revers polarity protection.

• Rated power 500W
• Peak power 1000W
• Input voltage DC12V
• Output voltage 220VAC or 230VAC or 240VAC±5%
• Unload current less than 0.6A
• Output frequency 50Hz±0.5Hz or 60Hz±0.5Hz
• Output waveform Pure Sine Wave
• Waveform distortion THD＜3%(Linear load)
• USB port 5V 1A
• Max.efficiency 90%
• Input voltage range 10-15.5V
• Low voltage alarm 10.5±0.5V
• Low voltage protection 10±0.5V 
• Over voltage protection 15.5±0.5V
• Low voltage recover 13±0.5V 
• Over voltage recover 14.8V±0.5V
• Protection function Low voltage Alarm at first, voltage continously reduce. LED Red light on & shut sown., Over voltage LED Red light on, shut down, Over load LED Red light on, shut down, Over temperature Alarm at first, tempurature continously rise.LED Red light on & shut sown, Short circuit LED Red light on, Input reverse polarity Fuse burn-out
• Working temperature -10°C - +50°C
• Storage temperature -30°C - +70°C
• Dimension(mm) 244x112x67mm
• Net./gross weight(g) 1197/1479g
• Cooling method Intelligent air cooling

VRLA Battery ULTRACELL 12 V 100 Ah

• Has a longer discharge time compared to other batteries. 
• Its special plate design increases the life cycle of the battery especially in warmer temperatures.
• A special separator within the battery can boost its performance.
• Length: 328 ± 2 mm 
• Width: 173 ± 2 mm 
• Container Height: 212 ± 2 mm 
• Total Height (with terminal): 232 ± 2 mm 
• Approx Weight: Approx 30.4 kg 

Off grid systems with battery power storage.

The system consists of:
- 4 x 260W BenQ polycrystalline panel
- 1 x Inverter 1000VA / 24
- 1 x MPPT 40A controller
- 2 x Battery UCG200-12
- 1 x Tilt roof system
- 20 x 6mm solar cable
- Small items (sockets, fuses, etc.)

The system includes:

• 4 x 250W photovoltaic panel
• Inverter 3kva-24 MPPT
• 2 x 150A gel batteries
• 3 x 4200 mm bar
• 15 x clamping system 10x160
• 15 x fixing elements
• kit electric

Photovoltaic panel 250W
It is a robust photovoltaic panel made up of 60 solar cells.
It stands out with its high efficiency of up to 16.40% and output power tolerance of 1.6%.
Electrical features

• Maximum power (Pmax) 254.99W
• Maximum voltage (Vmp) 31.62V
• Maximum Intensity (Imp) 8.37A
• Vacuum Voltage (Voc) 37.98V
• Short circuit current (Isc) 8.903A
• Efficiency of encapsulated cells (ᶇ%) 18.1%
• Module efficiency (%) 16.4%
• Power tolerance at module output + 0 ... 5W

* Values ​​for testing under standard STC (AM 1.5, 1000W / m2, cell temperature 25 ° C)
 Mechanical features

• Solar cells Polycrystalline silicon 156mm x 156mm (6 inches)
• Number of serial numbers 60 (6 × 10)
• Dimensions 1657mm x 998mm x 38mm
• Weight 18.1kg
• 3.2mm heat-shielding glass / prismatic structure
• Frame Anodised aluminum
• Tyco Solarlok Z - Rail Junction Box, 115mm x 110mm x 23mm
• Protection against moisture and dust IP65
• 4.0mm² connecting cables, symmetric lengths for connector (+) and (-), 1000mm
• Connectors Compatible with MC4, size 70mm
• Resistance to external winds - 200km / h, snow - 550kg / m², hail - 80km / h for 25mm
• Warranty 10 years
• Efficient warranty over 90% in the first 12 years; over 80% up to 25 years

 Operating and storage parameters

• Operating temperature between -40º and 85ºC
• Storage temperature between -40º and 85ºC
• Breaking voltage 1000VDC (IEC)
• Fuse protection 20A

 Temperature characteristics

• Nominal cell operating temperature 45º +/- 2ºC
• Current coefficient (% k) 0.0473
• Coefficient of voltage (% k) -0.3166
• Power factor (% k) -0.397

Inverter/charger Poweracu Pur Sinus PPT3000-24P 3000VA 2400W 24
Main Features

• Pure sine wave solar inverter
• Selectable high power charging current
• Wide DC input range
• Selectable input voltage range for home appliances and personal computers
• Configurable AC/Solar input priority via LCD setting
• Compatible to mains voltage or generator power
• Auto restart while AC is recovering
• Overload and short circuit protection
• Smart battery charger design for optimizing battery performance
• Cold start function

RATED POWER 3000VA / 2400W
INPUT

• Voltage 230 VAC
• Selectable Voltage Range 170-280 VAC (For Personal Computers) ; 90-280 VAC (For Home Appliances)
• Frequency Range 50 Hz/60 Hz (Auto sensing)

OUTPUT

• AC Voltage Regulation (Batt. Mode) 230 VAC ± 5%
• Surge Power 6000VA
• Efficiency (Peak) 90%~93%
• Transfer Time 10 ms (For Personal Computers) ; 20 ms (For Home Appliances)
• Waveform Pure sine wave

BATTERY

• Battery Voltage 24 VDC
• Floating Charge Voltage 27 VDC
• Overcharge Protection 33 VDC

SOLAR CHARGER & AC CHARGER

• Solar Charger Type MPPT
• Max. PV Array Open Circuit Voltage 145VDC
• Max. PV Array Power 1500 W
• MPP Range @operating Voltage 30-115 VDC
• Max. Solar Charge Current 60A
• Max. AC Charge Current 60 A
• Max. Charge Current 120 A

PHYSICAL 

• Dimension, D x W x H (mm) 100 x 300 x 440
• Net Weight (kgs) 10
• Communication Interface USB/RS232

ENVIRONMENT

• Humidity 5% to 95% Relative Humidity (Non-condensing)
• Operating Temperature -10°C to 50°C
• Storage Temperature -15°C to 60°C

VRLA Ultracell battery with GEL 12V, 150Ah UCG150-12
Life span: up to 10 years
Norms: ISO 9001
Technology: VRLA GEL
Electrolyte: H2SO4 GEL
Plates: Planar 3D Alloys: PbCaSn
Connectors: silver copper alloy
Loading temperature: 0°C and 40°C
Discharge temperature: -15°C to 50°C.
Storage temperature: -15°C to 40°C
Load current: less than 45A
Max Cyclic Voltage: 14.4V at 15V
Maximum standby voltage: 13.6 V at 13.8V
Max discharge: 1500 A (5s)
Internal resistance: 2.5 MOhm
Capacity at 25 °:
160Ah en C20 to 1.80V / cell
150Ah en C20 at 1.80V / cell
131Ah en C5 to 1.75 / cell
119Ah en C3 at 1.75 / cell
97Ah en C1 to 1.60V / Cell
Length: 485 mm Depth: 170 mm Height: 240 mm Max. Height: 240 mm
Weight: 44 kg

The system consists of:
- 31 x 260W BenQ polycrystalline panel
- 1x Inverter 10kW
- 1 x Battery LifePo 100A 48V 4.8W
- Tilt roof system
- 70 x 6mm solar cable
- Small items (sockets, fuses, etc.)

Off grid systems with battery power storage.

The system consists of:
- 24 x 260W BenQ polycrystalline panel
- 1x Invertor MKS Plus 5k-48, MPPT 60A
-1 x Battery LifePo 100A4 48V 4.8kW
- Tilt roof system
- 60 x 6mm solar cable
- Small items (sockets, fuses, etc.)

Lithium-ion power supply for camping emergency reserve with DC / AC silent inverter, auto output 12V, AC and USB.
Complete input and output devices without installation, operation is simple, fast and convenient.
Overcharge, over discharge and overload protection, high temperature protection, short circuit protection and other functions.
With a maximum capacity of 400 Wh, this mini electric generator is capable of meeting different types of power requirements. For example, it can power personal electronic devices and household appliances, start cars, power tools, and help keep the light on in case of an emergency.

Battery
Battery capacity 400Wh
Battery type Samsung Li-ion battery
Approximation time:
AC wall charger for 4 hours (120 W)
8.5 hour DC Car Charger (48W)
4 hour solar charger (120 W)

AC Output
Nominal output power 300W
600W output speed
Output voltage 100V / 110V / 120Vac or 220V / 230V / 240Vac
Output Frequency 50Hz / 60Hz

DC output
4 USB port 2 x 5V2.1A; 2 x 5V1A
1 X 12V auto port 120W
2 x DC port 6 mm 2 x 12 V 3A

Working conditions
Relative Humidity: 10% ~ 90%
Download: Temperature: -10 ~ 60 ℃
Loading: Temperature: 0 ~ 45 ℃

Product size 230 × 140 × 235 mm
Color Black
Weight: 5.6 kg

Off grid systems with battery power storage.

The system consists of:
- 8 x 260W BenQ polycrystalline panel
- 1 x Inverter 2000VA / 24
- 1 x MPPT 40A controller
- 4 x Battery UCG200-12
- 1 x Tilt roof system
- 20 x 6mm solar cable
- Small items (sockets, fuses, etc.)

The system includes:

• 6 x 250W photovoltaic panel
• Inverter 3kva-24 MPPT
• 2 x 150A gel batteries
• 5 x 4200 mm bar
• 20 x clamping system 10x160
• 20 x fixing elements
• kit electric

Photovoltaic panel 250W
It is a robust photovoltaic panel made up of 60 solar cells.
It stands out with its high efficiency of up to 16.40% and output power tolerance of 1.6%.
Electrical features

• Maximum power (Pmax) 254.99W
• Maximum voltage (Vmp) 31.62V
• Maximum Intensity (Imp) 8.37A
• Vacuum Voltage (Voc) 37.98V
• Short circuit current (Isc) 8.903A
• Efficiency of encapsulated cells (ᶇ%) 18.1%
• Module efficiency (%) 16.4%
• Power tolerance at module output + 0 ... 5W

* Values ​​for testing under standard STC (AM 1.5, 1000W / m2, cell temperature 25 ° C)
 Mechanical features

• Solar cells Polycrystalline silicon 156mm x 156mm (6 inches)
• Number of serial numbers 60 (6 × 10)
• Dimensions 1657mm x 998mm x 38mm
• Weight 18.1kg
• 3.2mm heat-shielding glass / prismatic structure
• Frame Anodised aluminum
• Tyco Solarlok Z - Rail Junction Box, 115mm x 110mm x 23mm
• Protection against moisture and dust IP65
• 4.0mm² connecting cables, symmetric lengths for connector (+) and (-), 1000mm
• Connectors Compatible with MC4, size 70mm
• Resistance to external winds - 200km / h, snow - 550kg / m², hail - 80km / h for 25mm
• Warranty 10 years
• Efficient warranty over 90% in the first 12 years; over 80% up to 25 years

 Operating and storage parameters

• Operating temperature between -40º and 85ºC
• Storage temperature between -40º and 85ºC
• Breaking voltage 1000VDC (IEC)
• Fuse protection 20A

 Temperature characteristics

• Nominal cell operating temperature 45º +/- 2ºC
• Current coefficient (% k) 0.0473
• Coefficient of voltage (% k) -0.3166
• Power factor (% k) -0.397

Inverter/charger Poweracu Pur Sinus PPT3000-24P 3000VA 2400W 24
Main Features

• Pure sine wave solar inverter
• Selectable high power charging current
• Wide DC input range
• Selectable input voltage range for home appliances and personal computers
• Configurable AC/Solar input priority via LCD setting
• Compatible to mains voltage or generator power
• Auto restart while AC is recovering
• Overload and short circuit protection
• Smart battery charger design for optimizing battery performance
• Cold start function

RATED POWER 3000VA / 2400W
INPUT

• Voltage 230 VAC
• Selectable Voltage Range 170-280 VAC (For Personal Computers) ; 90-280 VAC (For Home Appliances)
• Frequency Range 50 Hz/60 Hz (Auto sensing)

OUTPUT

• AC Voltage Regulation (Batt. Mode) 230 VAC ± 5%
• Surge Power 6000VA
• Efficiency (Peak) 90%~93%
• Transfer Time 10 ms (For Personal Computers) ; 20 ms (For Home Appliances)
• Waveform Pure sine wave

BATTERY

• Battery Voltage 24 VDC
• Floating Charge Voltage 27 VDC
• Overcharge Protection 33 VDC

SOLAR CHARGER & AC CHARGER

• Solar Charger Type MPPT
• Max. PV Array Open Circuit Voltage 145VDC
• Max. PV Array Power 1500 W
• MPP Range @operating Voltage 30-115 VDC
• Max. Solar Charge Current 60A
• Max. AC Charge Current 60 A
• Max. Charge Current 120 A

PHYSICAL 

• Dimension, D x W x H (mm) 100 x 300 x 440
• Net Weight (kgs) 10
• Communication Interface USB/RS232

ENVIRONMENT

• Humidity 5% to 95% Relative Humidity (Non-condensing)
• Operating Temperature -10°C to 50°C
• Storage Temperature -15°C to 60°C

VRLA Ultracell battery with GEL 12V, 150Ah UCG150-12
Life span: up to 10 years
Norms: ISO 9001
Technology: VRLA GEL
Electrolyte: H2SO4 GEL
Plates: Planar 3D Alloys: PbCaSn
Connectors: silver copper alloy
Loading temperature: 0°C and 40°C
Discharge temperature: -15°C to 50°C.
Storage temperature: -15°C to 40°C
Load current: less than 45A
Max Cyclic Voltage: 14.4V at 15V
Maximum standby voltage: 13.6 V at 13.8V
Max discharge: 1500 A (5s)
Internal resistance: 2.5 MOhm
Capacity at 25 °:
160Ah en C20 to 1.80V / cell
150Ah en C20 at 1.80V / cell
131Ah en C5 to 1.75 / cell
119Ah en C3 at 1.75 / cell
97Ah en C1 to 1.60V / Cell
Length: 485 mm Depth: 170 mm Height: 240 mm Max. Height: 240 mm
Weight: 44 kg

The system consists of:
- 35 x 260W BenQ polycrystalline panel
- 1x Inverter 10kW
- 8 x Battery UCG200-12
- Tilt roof system
- 80 x 6mm solar cable
- Small items (sockets, fuses, etc.)

The system includes:

• 8 x 250W photovoltaic panel
• Inverter 5kva-48 MPPT
• 4 x 150A gel batteries
• 6 x 4200 mm bar
• 30 x clamping system 10x160
• 30 x fixing elements
• kit electric

Photovoltaic panel 250W
It is a robust photovoltaic panel made up of 60 solar cells.
It stands out with its high efficiency of up to 16.40% and output power tolerance of 1.6%.
Electrical features

• Maximum power (Pmax) 254.99W
• Maximum voltage (Vmp) 31.62V
• Maximum Intensity (Imp) 8.37A
• Vacuum Voltage (Voc) 37.98V
• Short circuit current (Isc) 8.903A
• Efficiency of encapsulated cells (ᶇ%) 18.1%
• Module efficiency (%) 16.4%
• Power tolerance at module output + 0 ... 5W

* Values ​​for testing under standard STC (AM 1.5, 1000W / m2, cell temperature 25 ° C)
 Mechanical features

• Solar cells Polycrystalline silicon 156mm x 156mm (6 inches)
• Number of serial numbers 60 (6 × 10)
• Dimensions 1657mm x 998mm x 38mm
• Weight 18.1kg
• 3.2mm heat-shielding glass / prismatic structure
• Frame Anodised aluminum
• Tyco Solarlok Z - Rail Junction Box, 115mm x 110mm x 23mm
• Protection against moisture and dust IP65
• 4.0mm² connecting cables, symmetric lengths for connector (+) and (-), 1000mm
• Connectors Compatible with MC4, size 70mm
• Resistance to external winds - 200km / h, snow - 550kg / m², hail - 80km / h for 25mm
• Warranty 10 years
• Efficient warranty over 90% in the first 12 years; over 80% up to 25 years

 Operating and storage parameters

• Operating temperature between -40º and 85ºC
• Storage temperature between -40º and 85ºC
• Breaking voltage 1000VDC (IEC)
• Fuse protection 20A

 Temperature characteristics

• Nominal cell operating temperature 45º +/- 2ºC
• Current coefficient (% k) 0.0473
• Coefficient of voltage (% k) -0.3166
• Power factor (% k) -0.397

Inverter/charger Poweracu Pur Sinus PPT5000-48 5000VA 4000W 48V
Main Features

• Pure sine wave solar inverter
• Selectable high power charging current
• Wide DC input range
• Selectable input voltage range for home appliances and personal computers
• Configurable AC/Solar input priority via LCD setting
• Compatible to mains voltage or generator power
• Auto restart while AC is recovering
• Overload and short circuit protection
• Smart battery charger design for optimizing battery performance
• Cold start function

RATED POWER 5000VA /4000W 
INPUT 

• Voltage 230 VAC 
• Selectable Voltage Range 170-280 VAC (For Personal Computers) ; 90-280 VAC (For Home Appliances) 
• Frequency Range 50 Hz/60 Hz (Auto sensing) 

OUTPUT AC 

• Voltage Regulation (Batt. Mode) 230 VAC ± 5% 
• Surge Power 10000VA 
• Efficiency (Peak) 90%~93% 
• Transfer Time 10 ms (For Personal Computers) ; 20 ms (For Home Appliances) 
• Waveform Pure sine wave 

BATTERY 

• Battery Voltage 48VDC 
• Floating Charge Voltage 54 VDC 
• Overcharge Protection 63 VDC 

SOLAR CHARGER & AC CHARGER 

• Solar Charger Type MPPT 
• Max. PV Array Open Circuit Voltage 145VDC 
• Max. PV Array Power 3000 W 
• MPP Range @operating Voltage 60-115 VDC 
• Max. Solar Charge Current 60A 
• Max. AC Charge Current 60 A 
• Max. Charge Current 120 A 

PHYSICAL 

• Dimension, D x W x H (mm) 100 x 300 x 440 
• Net Weight (kgs) 10 
• Communication Interface USB/RS232 

ENVIRONMENT

• Humidity 5% to 95% Relative Humidity (Non-condensing)
• Operating Temperature -10°C to 50°C
• Storage Temperature -15°C to 60°C

VRLA Ultracell battery with GEL 12V, 150Ah UCG150-12
Life span: up to 10 years
Norms: ISO 9001
Technology: VRLA GEL
Electrolyte: H2SO4 GEL
Plates: Planar 3D Alloys: PbCaSn
Connectors: silver copper alloy
Loading temperature: 0°C and 40°C
Discharge temperature: -15°C to 50°C.
Storage temperature: -15°C to 40°C
Load current: less than 45A
Max Cyclic Voltage: 14.4V at 15V
Maximum standby voltage: 13.6 V at 13.8V
Max discharge: 1500 A (5s)
Internal resistance: 2.5 MOhm
Capacity at 25 °:
160Ah en C20 to 1.80V / cell
150Ah en C20 at 1.80V / cell
131Ah en C5 to 1.75 / cell
119Ah en C3 at 1.75 / cell
97Ah en C1 to 1.60V / Cell
Length: 485 mm Depth: 170 mm Height: 240 mm Max. Height: 240 mm
Weight: 44 kg

The system consists of:
- 35 x 260W BenQ polycrystalline panel
- 1x Inverter 10kW
- 1 x Battery LifePo 100A 48V 4.8W
- Tilt roof system
- 80 x 6mm solar cable
- Small items (sockets, fuses, etc.)

The system consists of:
- 39 x 260W BenQ polycrystalline panel
- 1x Invertor 10kw
- 2 x Battery LifePo 100A 48V 9.6W
- Tilt roof system
- 100 x 6mm solar cable
- Small items (sockets, fuses, etc.)