Your Cart Inverters
Inverter Type
Inverter Category
Inverter Power
Inverter Voltage
Inverter Wave
Price
Manufacturers
Display: 1-2 from 2 products
your selection:
Inverter Type: Solar
- Brand: Victron Energy
Uninterrupted AC power (UPS function):
In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption
Remote Monitoring and Control:
Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more…
Proven reliability:
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
PowerControl – Dealing with limited generator, shore side or grid power:
With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power:
Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools
Programmable relay:
By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).
Voltage (V): 12
Peak Power (W) : 900
Max Efficiency: 90%
Programmable Relay: Yes
Dimensions: H311 x W182 x D100mm
Battery Temperature Sensor: Yes
Remote on-off: On/off/charger only
Protection Category: IP21
Three Phase and Parallel Operation: Yes
Transfer Switch (A): 16
Cont. Output Power at 25°C (VA): 500
Cont. Output Power at 25°C (W) : 430
Cont. Output Power at 40°C (W) : 400
Cont. Output Power at 65°C (W) : 300
Zero Load Power (W): 6
Zero Load Power in Search Mode (W): 2
Charge Current House Battery (A): 20
Charge Current Starter Battery (A): 1
VE.Bus Communication Port:
For parallel and three phase operation, remote monitoring and system integration
DIP switches: Yes
Internal DC fuse : 125A
.jpg-817-5663.jpg)
- Brand: Victron Energy
The Inverter RS Smart Solar is a combination of a powerful 48VDC, 6kVA 230VAC inverter and a high voltage, 80-450VDC, 4kW MPPT solar charger. Thanks to its modern design and high frequency technology the inverter only weighs 11kg and has an excellent efficiency, low standby power, and very quiet operation.
The inverter is equipped with a display to read out battery, inverter, and solar charger details. These parameters can also be read out via Bluetooth by the VictronConnect App. In addition to this, the inverter has a VE.Direct and a VE.Can Port, for connection to a GX device for system monitoring.
Inverter RS Smart Solar 48/6000
INVERTER
DC Input voltage range 38 – 64 V
Output Output voltage: 230 VAC ± 2%
Frequency: 50 Hz ± 0.1% (1)
Continuous output power at 25°C Increases linearly from 4800 W at 46 VDC to 5300 W at 52 VDC
Continuous output power at 40°C: 4500W
Continuous output power at 65°C: 3000W
Peak power 9 kW for 3 seconds
Short-circuit output current: 50A
Maximum efficiency: 96.5% at 1 kW load 94% at 5 kW load
SOLAR:
Maximum DC voltage: 450V
Nominal DC voltage: 300V
Start-up voltage: 120V
MPPT operating voltage range 80 – 450V
DC input current limit: 18A
Maximum DC input current: 20A
Maximum PV input power: 4000W
Maximum DC charging power: 4000W