UPS

Display: 1-8 from 8 products

your selection:

Price: Over 202,44 Remove
1
Victron Energy AGM Telecom Battery 12V 115Ah (M8)
  • Brand: Victron Energy
Designed for telecom applications: excellent ‘floor space savers’ for marine and vehicle applications.

The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles.

AGM technology:
AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. 

Low self-discharge:
Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature with 10°C.

Low internal resistance:
Accepts very high charge and discharge rates.

High cyclic life capability:
More than 500 cycles at 50% depth of discharge.

Specification:

Voltage (V): 12
Ah: 115
Terminal Type: M8
Dimensions (Including Terminals): L395 x W110 x H293mm
Weight (kg): 35
Battery Technology: AGM
Read more
396.45 EUR VAT included
The product is in stock
Details
2
Victron Energy AGM Telecom Battery 12V 165Ah (M8)
  • Brand: Victron Energy
Designed for telecom applications: excellent ‘floor space savers’ for marine and vehicle applications.

The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles.

AGM technology:
AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. 

Low self-discharge:
Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature with 10°C.

Low internal resistance:
Accepts very high charge and discharge rates.

High cyclic life capability:
More than 500 cycles at 50% depth of discharge.

Specification:

Voltage (V): 12
Ah: 165
Terminal Type: M8
Dimensions (Including Terminals): L548 x W105 x H316mm
Weight (kg): 49
Battery Technology: AGM
 
Read more
553.35 EUR VAT included
The product is in stock
Details
3
Victron Energy AGM Telecom Battery 12V 200Ah (M8)
  • Brand: Victron Energy
Designed for telecom applications: excellent ‘floor space savers’ for marine and vehicle applications.

The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles.

AGM technology:
AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. 

Low self-discharge:
Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature with 10°C.

Low internal resistance:
Accepts very high charge and discharge rates.

High cyclic life capability:
More than 500 cycles at 50% depth of discharge.

Specification:

Voltage (V): 12
Ah: 200
Terminal Type: M8
Dimensions (Including Terminals): L546 x W125 x H323mm
Weight (kg): 60
Battery Technology: AGM
 
Read more
631.21 EUR VAT included
The product is in stock
Details
4
Victron Energy LiFePO4 Battery 12.8V 100Ah Smart
  • Brand: Victron Energy
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.

A lead-acid battery will fail prematurely due to sulfation:
If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).

A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below).
LFP is therefore the chemistry of choice for demanding applications.

Efficient:
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.
The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%.
The round-trip energy efficiency of a LFP battery is 92%.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.

Size and weight:
Saves up to 70% in space Saves up to 70% in weight.

LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.

With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.

BMS:
Our LFP batteries have integrated cell balancing and cell monitoring. Up to 5 batteries can be paralleled and up to four 12V batteries or two 24V batteries can be series connected, so that a 48V battery bank of up to 1500Ah can be assembled. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS).

Voltage (V): 12.8
Ah: 100
Terminal Type: M8
Terminal Layout: RH+
Dimensions (Including Terminals): H197 x W321 x D152mm
Battery Technology: Lithium
 
Read more
919.86 EUR VAT included
The product is in stock
Details
5
Victron Energy LiFePO4 Battery 12.8V 200Ah Smart
  • Brand: Victron Energy
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.

A lead-acid battery will fail prematurely due to sulfation:
If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).

A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below).
LFP is therefore the chemistry of choice for demanding applications.

Efficient:
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.
The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%.
The round-trip energy efficiency of a LFP battery is 92%.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.

Size and weight:
Saves up to 70% in space Saves up to 70% in weight.

LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.

With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.

BMS:
Our LFP batteries have integrated cell balancing and cell monitoring. Up to 5 batteries can be paralleled and up to four 12V batteries or two 24V batteries can be series connected, so that a 48V battery bank of up to 1500Ah can be assembled. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS).

Voltage (V): 12.8
Ah: 200
Terminal Type: M10
Terminal Layout: RH+
Dimensions (Including Terminals): H297 x W425 x D274mm
Battery Technology: Lithium
Read more
1416.92 EUR VAT included
The product is in stock
Details
6
Victron Energy LiFePO4 battery 25.6V 200Ah Smart
  • Brand: Victron Energy
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.

A lead-acid battery will fail prematurely due to sulfation:
If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).

A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below).
LFP is therefore the chemistry of choice for demanding applications.

Efficient:
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.
The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%.
The round-trip energy efficiency of a LFP battery is 92%.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.

Size and weight:
Saves up to 70% in space Saves up to 70% in weight.

LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.

With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.

BMS:
Our LFP batteries have integrated cell balancing and cell monitoring. Up to 5 batteries can be paralleled and up to four 12V batteries or two 24V batteries can be series connected, so that a 48V battery bank of up to 1500Ah can be assembled. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS).

Voltage (V): 25.6
Ah: 200
Terminal Type: M8
Terminal Layout: RH+
Dimensions (Including Terminals): H317 x W631 x D208
Battery Technology: Lithium
Read more
4282.26 EUR VAT included
Available on order
Details
7
Victron Energy MultiPlus 12/500/20-16 VE.Bus
  • Brand: Victron Energy
The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.

Uninterrupted AC power (UPS function):
In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption

Remote Monitoring and Control:
Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more…

Proven reliability:
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 PowerControl – Dealing with limited generator, shore side or grid power:
With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist – Boosting the capacity of shore or generator power:
Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools

Programmable relay:
 By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).

Voltage (V): 12

Peak Power (W) : 900
Max Efficiency: 90%
Programmable Relay: Yes
Dimensions: H311 x W182 x D100mm
Battery Temperature Sensor: Yes
Remote on-off: On/off/charger only
Protection Category: IP21
Three Phase and Parallel Operation: Yes
Transfer Switch (A): 16
Cont. Output Power at 25°C (VA): 500
Cont. Output Power at 25°C (W) : 430
Cont. Output Power at 40°C (W) : 400
Cont. Output Power at 65°C (W) : 300
Zero Load Power (W): 6
Zero Load Power in Search Mode (W): 2
Charge Current House Battery (A): 20
Charge Current Starter Battery (A): 1
VE.Bus Communication Port:
For parallel and three phase operation, remote monitoring and system integration
DIP switches: Yes
Internal DC fuse : 125A
Read more
475.50 EUR VAT included
The product is in stock
Details
8
UPS/Emergency Power System CyberPower CPS7500PIE
  • Brand: CyberPower
CyberPower CPS7500PIE provides backup power when regular systems fail for a wide range of applications including household appliances, office systems, banking & retail, and industrial sites. It provides noiseless, fuel-less, and clean Pure Sine Wave output with adjustable Automatic Voltage Regulation (AVR), making it a greener and better solution over traditional generators. The product is also generator-compatible, making it suitable for existing installations. It can accommodate unlimited number of batteries for additional runtime capacity, and the high charging current allows quick recharging up to five times faster. Users can access information of power/battery conditions and configure advanced settings, including alert of potential power problems and switching mode at the push of a button.

Product parameters:
  • Part numberCPS7500PIE
  • ManufacturerCYBERPOWER
  • FamilyEPS
  • RackmountTower
  • Nominal input voltage (Vac)220-240
  • DC input voltage (Vdc)48
  • Voltage output capacity (VA)7500
  • Output power (W)5000
  • Input connector typeHardwire Terminal Block
  • Number of network sockets3
  • Type of output socketSchuko/Hardwire Terminal Block
  • Response time (ms)10
  • LCDYes
  • Work signaling LED / Sound
  • Weight55.5kg
  • Dimensions (mm)355 x 440 x 370
  • Conditionnew
  • Warranty2 year
Read more
1899.99 EUR VAT included
The product is in stock
Details

Compara produse

You must add at least one product to compare products.

Was added to wishlist!

Was removed from wishlist!