Promotii

Smallest and safest mobile 22 kW charging station (ICCPD).
Compatible with all electric vehicles with type 2 or type 1 charging socket.

Three-phase, 11 or 22 kW charging with up to 32 amps. Fully charged in 3-4 hours in ideal conditions.

IP67 waterproof, drive-over resistant, suitable for use in -25 to +45 degrees, maximum safety in accordance with the latest standards.

Drive-over resistant to a wheel load of over 3 tonnes, impact-resistant and dust proof.
Not only splash-proof in accordance with IP67 but completely water resistant.
FI-AEV circuit breaker technology is already integrated, thus eliminating the need for an expensive and complicated subsequent installation. Charging stations without FI-AEV protection can be lethal.
Compatible with all vehicles featuring a type 2 or type 1 connection.
3-in-1: In addition to being used as a mobile charging station, the JUICE BOOSTER 2 can also be used as a wall box (with wall bracket) or type 2 cable (with type 2 adapter)

Specifications:

• Diameter: 70 mm, Length: 225 mm
• 1.0 kg excluding cables, 3.2 kg with cables and plugs
• 230V 6 – 32 A (1-phase), 400 V 6 – 32 A (3-phase) AC
• 1.4 – 22.0 kW AC depending on input current
• IP67 / RCD DC 6 mA, RCD AC/DC 30 mA / Protective conductor monitoring
• Metallic anthracite
• Mode 2 in accordance with IEC 62752
• Rubber caps / Black cable currently available with 12 self-detecting adapters, 1.4 m supply cable
• Type 2 (EN 62196) cable length 3.1 m

See productsheet: Download
 

Description:
Low voltage-temperature coefficient enhances high-temperature operation.
Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
25-Year limited warranty on power output and performance.
5-Year limited warranty on materials and workmanship.
Sealed, waterproof, multi-functional junction box gives high level of safety.
High performance bypass diodes minimize the power drop caused by shade.
Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.

Specification:
Voltage (V): 12
Nominal Power (W): 100
Number of cells in series: 36
Maximun System Voltage: 1000
Dimensions: L920 x W668 x D30mm
Cell Type: Polycrystalline

MultiGrid smooths out the risk of grid instability and energy costs by utilising energy storage and self-consumption. MultiGrid, is the VDE-AR-N 4105 and AU 4777.2:2015 approved, CEC listed version of the MultiPlus. With Anti-Islanding built in, this makes it suitable for countries such as Germany, Austria and others. In the UK the MultiPlus is used, as it is approved to the G83/2 and G59-3-1 standards required there.

Combined with the flexibility of a MultiPlus bidirectional converter The MultiPlus range of bidirectional converters is the worldwide product of choice on boats and vehicles to generate AC power, and to recharge batteries, either with shore power or an onboard AC generator. The MultiPlus also is the industry standard in on-grid and off-grid energy storage systems and is approved for use in energy storage and self-consumption systems in the UK (G83/2 and G59-3-1 standards).

Several hardware and firmware modifications were needed to qualify for VDE-AR-N 4105 and several other country specific energy storage related standards. The resulting product is the MultiGrid.

The MultiGrid fits seamlessly in all common energy storage topologies There is no one-size-fits-all solution to energy storage. The building blocks, topology and control systems will depend on local conditions and regulations.

The SuperPack batteries are extremely easy to install, not needing any additional components.
The internal switch will disconnect the battery in case of over discharge, over charge or high temperature.
The batteries can be connected in parallel. Series connection is not allowed.

Features:
Integrated BMS and safety switch.
The SuperPack batteries are extremely easy to install, needing no additional components.
The internal switch will disconnect the battery in case of over discharge, over charge or high temperature.

A lead-acid battery will fail prematurely due to sulfation:
If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
If it is left partially charged or worse, fully discharged.

A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid.

The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded.

Efficient:
In several applications (especially off-grid solar), energy efficiency can be of crucial importance.
The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%.
The round-trip energy efficiency of a Li-ion battery is 92%.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state).
In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions.

The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only.

Voltage (V): 12.8
Ah: 100
Terminal Type: M8
Terminal Layout: LH+
Dimensions (Including Terminals): L330 x W171 x H220mm
Weight (kg): 14
Battery Technology: Lithium

   The PylonTech US3000B 3.5 KWH Li-Ion Solar Battery Module 48V is an HESS battery system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle. A self designed BMS protects the cell from abnormal temperature, current, voltage, SoC and SoH.
 

• Vertical solar battery industry integration ensures more than 4500 cycles at 90% of DoD or 6000 cycles with 80% of DOD (please note most devices will set the DOD at 80%)
• Compact and fashionable design fits in your sweet home environment
• Modular design gives the end customers the power of choice of capacity
• Compatible with large number of Hybrid inverters
• Simple buckle fixing minimize the installation time and cost
• Safety Cert.TÜV CE UN38.3