Inverter/charger MPP SOLAR Pur Sinus PIP1212MS 12V 1200W

Main Features for MS/MSX Series
● Built-in MPPT solar charger 20A~80A Max!
● Max AC charging up to 60A (48v models only)
● Max total system charging: 60A + 80A = 140A* !
● High frequency, light-weight design
● Programmable menu
● Adjustable Bulk/Float Voltage
● Supports various lead acid batteries
● Inverter+ AC Charger + Solar Charger 3-in-1 design
● Pure sine wave output
● 2X surge capacity up to 5 seconds
● USB communication
● LCD monitor display system info + LED indicators
● FREE monitoring software included
● Built-in generator starter dry contact**
● Overload/Overtemp/short circuit protections
● Cold start capability (requires DC)
* Inverter-type generators are recommended for better compatibility. Conventional type may be rejected
** Transfer time may be longer (30ms) when used in parallel configuration and this may cause interruption in certain load
Only 48V models are PARALLEL–READY.
Optional Parallel Kit required for all units in parallel and sold separately. 

Electrical Specifications  
Continuous Output 1200W 
Surge Rating 5 seconds max, 2X
Input Power Factor 0.8
Input Voltage Range 90~280VAC (Appliance mode), 170~280VAC (UPS mode)
Input/Output Frequency 50Hz / 60Hz
Output Voltage 230VAC±5%
Output Waveform Pure Sine Wave
Output Regulation < 3% RMS for battery voltage range
Peak Efficiency 93% 
Nominal DC Voltage 12V 
Max DC Voltage 16V 
Transfer Time (2 Modes) <10ms (UPS mode), <20ms (Appliance mode)**
Charging Mode 3-stage
Bulk Voltage (Flooded, AMG/GEL) 14.6V/14.1V 
Float Voltage 13.5V 
Max AC Charging Current 60A 
No Load Power Consumption <20W
Power Saving Consumption <10W

Solar Charger
Max PV Input / Output 500W
Max Charging Current 40A 
Max PV Input Voc, MPPT Range 100V, 18~80V
Algorithm MPPT 

ENVIRONMENTAL / MECHANICAL SPECIFICATIONS
Certification CE
Operating/Storage Temp. 0°C ~ 55°C / -15°C~ 60°C
Operating Humidity 5~90%RH Non-Condensing
Dimension 355*272*100mm 
Net Weight 7Kg