Inverters

Filter By

Inverter Type

View more

Inverter Category

View more

Inverter Power

View more

Inverter Voltage

View more

Inverter Wave

View more

Manufacturers

View more

Display: 49-72 from 192 products

49
Victron Energy EasySolar 24/1600/40-16 230V MPPT 100/50 Inverter/Solar Charger
  • Brand: Victron Energy

The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.

 

All-in-one solar power solution

The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring

 

The solar charge controller: Blue Solar MPPT 100/50

Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.

 

The inverter/charger: MultiPlus Compact 24/1600/40

The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.

 

AC distribution

The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available.

 

PowerAssist

Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.

 

Unique solar application software

Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.

Read more
1685.21 EUR VAT included
The product is in stock
Details
50
Victron Energy EasySolar 48/3000/35-50 MPPT 150/70 Color Control
  • Brand: Victron Energy

All-in-one solar power solution

The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.

The all-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. 
 
Color Control panel Two outstanding functions: - Prioritizes battery charging by the MPPT charge controller  - Connects to the internet, enabling remote monitoring (VRM website) and remote control. 
 
AC distribution The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers. An additional 16A output is controlled by the AC input: it will switch on only when AC is available. 
 
PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. 
 

Read more
2025.00 EUR VAT included
Available on order
Details
51
Inverter 12V 250VA Victron Energy Phoenix VE.Direct NEMA 5-12R
  • Brand: Victron Energy

Product Code

PIN122510500

Model

Phoenix

Output

230VAC +/- 3% 50Hz or 60Hz +/- 0,1%

Cont. output power at 25°C (W)

200

Peak power (W)

350

Maximum efficiency (%)

87

Protection

output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, DC ripple too high

Safety

EN/IEC 60335-1 / EN/IEC 62109-1

Dimensions (D x W x H)

86x165x260 mm

Net Weight

2.4 Kg

Waveform

Pure Sine Wave

Rated Power W

200W

Battery Voltage V

12 V

Read more
123.37 EUR VAT included
The product is in stock
Details
52
Inverter 12V 375VA Victron Energy Phoenix VE.Direct NEMA 5-15R
  • Brand: Victron Energy

 

Product Code

PIN123750500

Model

Phoenix

Output

230VAC +/- 3% 50Hz or 60Hz +/- 0,1%

Cont. output power at 25°C (W)

375

Cont. output power at 40°C (W)

300

Maximum efficiency (%)

89

Protection

output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, DC ripple too high

Safety

EN/IEC 60335-1 / EN/IEC 62109-1

Dimensions (D x W x H)

86x165x260 mm

Net Weight

3 Kg

Waveform

Pure Sine Wave

Rated Power W

300W

Battery Voltage V

12 V


 
Read more
150.91 EUR VAT included
The product is in stock
Details
53
Inverter 12V 500VA Victron Energy Phoenix VE.Direct NEMA 5-15R
  • Brand: Victron Energy

Inverters allow you to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC.

 

Highly Reliable - built for the years ahead

Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.

 

Full bursts - High Peak output

Some electronic devices - particularly those which have an electric motor - require short burst of energy on start-up which is much higher than their rated power consumption. No problem - the Phoenix inverter has industry-leading peak-power capability.

 

Intelligent alarms, shut-downs, and re-starts

A high power draw on start-up can trigger false alarms, and shut-downs. Phoenix makes allowance for this and only shuts down in cases of persistent overload. Intelligently - shut downs will be followed by a series of re-starts - to eliminate 'false alarms'.

 

Conserve power with Eco mode

In Eco mode the inverter shuts down when no power is required. Phoenix senses the output socket every couple of seconds and automatically turns back on if power is again required.

 

User-configurable settings

Phoenix has a communication port providing access to status information, alarms and automatic user-configurable low-voltage shut downs. Shut downs will be followed by a series of intelligent re-start attempts. User settings can be accessed from your computer or mobile device via VictronConnect - our free-to-use app.

 

Features

VE.Direct communication port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable needed)

• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

 

Fully configurable:

• Low battery voltage alarm trip and reset levels

• Low battery voltage cut-off and restart levels

• Dynamic cut-off: load dependent cut-off level

• Output voltage 210 - 245V

• Frequency 50 Hz or 60 Hz

• ECO mode on/off and ECO mode sense level

 

Monitoring:

• In- and output voltage, % load and alarms

 

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

 

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

 

Remote on/off

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

 

LED diagnosis

Please see manual for a description.

 

To transfer the load to another AC source: the automatic transfer switch

For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

 

Available with different output sockets

Schuko, UK, AU/NZ, IEC-320, Nema 5-15R

 

DC connection with screw terminals

No special tools needed for installation

 

Full Specifications

  • Part Number : PIN125010500
  • Manufacturer : Victron Energy
  • Output Wave Form : Pure Sine Wave
  • Voltage (V) : 12
  • Frequency (Hz) : 50Hz or 60Hz
  • Watts : 400
  • Peak Power (W) : 900
  • Continuous Output Power (VA) : 500
  • Length (Mm) : 275
  • Width (Mm) : 172
  • Height (Mm) : 86
  • Manufactured Weight (Kg) : 3.9
  • Remote Control : No
Read more
189.24 EUR VAT included
The product is in stock
Details
54
Inverter 24V 250VA Victron Energy Phoenix VE.Direct NEMA 5-15R
  • Brand: Victron Energy
 
Product Code PIN242510500
Model Phoenix
Output 230VAC +/- 3% 50Hz or 60Hz +/- 0,1%
Cont. output power at 25°C (W) 200
Peak power (W) 350
Maximum efficiency (%) 88
Protection output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, DC ripple too high
Safety EN/IEC 60335-1 / EN/IEC 62109-1
Dimensions (DxWxH)  86x165x260 mm
Net Weight 2.4 Kg
Waveform Pure Sine Wave
Rated Power W 200W
Battery Voltage V 24 V


 
Read more
123.37 EUR VAT included
The product is in stock
Details
55
Inverter 24V 375VA Victron Energy Phoenix VE.Direct NEMA 5-15R
  • Brand: Victron Energy
 
Product Code PIN243750500
Model Phoenix
Output 230VAC +/- 3% 50Hz or 60Hz +/- 0,1%
Cont. output power at 25°C (W) 375
Cont. output power at 40°C (W) 300
Maximum efficiency (%) 89
Protection output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, DC ripple too high
Safety EN/IEC 60335-1 / EN/IEC 62109-1
Dimensions (DxWxH) 86x165x260 mm
Net Weight 2.4 Kg
Waveform Pure Sine Wave
Rated Power W 300W
Battery Voltage V 24 V
Read more
150.91 EUR VAT included
The product is in stock
Details
56
Inverter 24V 800VA Victron Energy Phoenix VE.Direct NEMA 5-15R
  • Brand: Victron Energy

Inverters allow you to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC. 

 

Highly Reliable - built for the years ahead

Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.

 

Full bursts - High Peak output

Some electronic devices - particularly those which have an electric motor - require short burst of energy on start-up which is much higher than their rated power consumption. No problem - the Phoenix inverter has industry-leading peak-power capability.

 

Intelligent alarms, shut-downs, and re-starts

A high power draw on start-up can trigger false alarms, and shut-downs. Phoenix makes allowance for this and only shuts down in cases of persistent overload. Intelligently - shut downs will be followed by a series of re-starts - to eliminate 'false alarms'.

 

Conserve power with Eco mode

In Eco mode the inverter shuts down when no power is required. Phoenix senses the output socket every couple of seconds and automatically turns back on if power is again required.

 

User-configurable settings

Phoenix has a communication port providing access to status information, alarms and automatic user-configurable low-voltage shut downs. Shut downs will be followed by a series of intelligent re-start attempts. User settings can be accessed from your computer or mobile device via VictronConnect - our free-to-use app.

 

Features

VE.Direct communication port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable needed)

• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

 

Fully configurable:

• Low battery voltage alarm trip and reset levels

• Low battery voltage cut-off and restart levels

• Dynamic cut-off: load dependent cut-off level

• Output voltage 210 - 245V

• Frequency 50 Hz or 60 Hz

• ECO mode on/off and ECO mode sense level

 

Monitoring:

• In- and output voltage, % load and alarms

 

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

 

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

 

Remote on/off

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

 

LED diagnosis

Please see manual for a description.

 

To transfer the load to another AC source: the automatic transfer switch

For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

 

DC connection with screw terminals

No special tools needed for installation

 

Full Specifications

  • Part Number : PIN241800500
  • Manufacturer : Victron Energy
  • Output Wave Form : Pure Sine Wave
  • Voltage (V) : 24
  • Frequency (Hz) : 50Hz or 60Hz
  • Watts : 650
  • Peak Power (W) : 1500W
  • Continuous Output Power (VA) : 800
  • Length (Mm) : 105
  • Width (Mm) : 216
  • Height (Mm) : 305
  • Manufactured Weight (Kg) : 5.5
  • Remote Control : No
Read more
323.39 EUR VAT included
The product is in stock
Details
57
Phoenix Inverter 48/375 VE. Direct NEMA 5-15R
  • Brand: Victron Energy

Highly Reliable - built for the years ahead

Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.

 

Full bursts - High Peak output

Some electronic devices - particularly those which have an electric motor - require short burst of energy on start-up which is much higher than their rated power consumption. No problem - the Phoenix inverter has industry-leading peak-power capability.

 

Intelligent alarms, shut-downs, and re-starts

A high power draw on start-up can trigger false alarms, and shut-downs. Phoenix makes allowance for this and only shuts down in cases of persistent overload. Intelligently - shut downs will be followed by a series of re-starts - to eliminate 'false alarms'.

 

Conserve power with Eco mode

In Eco mode the inverter shuts down when no power is required. Phoenix senses the output socket every couple of seconds and automatically turns back on if power is again required.

 

User-configurable settings

Phoenix has a communication port providing access to status information, alarms and automatic user-configurable low-voltage shut downs. Shut downs will be followed by a series of intelligent re-start attempts. User settings can be accessed from your computer or mobile device via VictronConnect - our free-to-use app.

 

Features

VE.Direct communication port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable needed)

• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

 

Fully configurable:

• Low battery voltage alarm trip and reset levels

• Low battery voltage cut-off and restart levels

• Dynamic cut-off: load dependent cut-off level

• Output voltage 210 - 245V

• Frequency 50 Hz or 60 Hz

• ECO mode on/off and ECO mode sense level

 

Monitoring:

• In- and output voltage, % load and alarms

 

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

 

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

 

Remote on/off

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

 

LED diagnosis

Please see manual for a description.

 

To transfer the load to another AC source: the automatic transfer switch

For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

 

DC connection with screw terminals

No special tools needed for installation

 

Full Specifications

  • Part Number : PIN483750500
  • Manufacturer : Victron Energy
  • Output Wave Form : Pure Sine Wave
  • Voltage (V) : 48
  • Frequency (Hz) : 50Hz or 60Hz
  • Watts : 300
  • Peak Power (W) : 700
  • Continuous Output Power (VA) : 375
  • Length (Mm) : 260
  • Width (Mm) : 165
  • Height (Mm) : 86
  • Manufactured Weight (Kg) : 3
  • Remote Control : No
Read more
150.91 EUR VAT included
The product is in stock
Details
58
Phoenix Inverter 48/500 VE. Direct NEMA 5-15R
  • Brand: Victron Energy

Highly Reliable - built for the years ahead

Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.

 

Full bursts - High Peak output

Some electronic devices - particularly those which have an electric motor - require short burst of energy on start-up which is much higher than their rated power consumption. No problem - the Phoenix inverter has industry-leading peak-power capability.

 

Intelligent alarms, shut-downs, and re-starts

A high power draw on start-up can trigger false alarms, and shut-downs. Phoenix makes allowance for this and only shuts down in cases of persistent overload. Intelligently - shut downs will be followed by a series of re-starts - to eliminate 'false alarms'.

 

Conserve power with Eco mode

In Eco mode the inverter shuts down when no power is required. Phoenix senses the output socket every couple of seconds and automatically turns back on if power is again required.

 

User-configurable settings

Phoenix has a communication port providing access to status information, alarms and automatic user-configurable low-voltage shut downs. Shut downs will be followed by a series of intelligent re-start attempts. User settings can be accessed from your computer or mobile device via VictronConnect - our free-to-use app.

 

Features

VE.Direct communication port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable needed)

• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

 

Fully configurable:

• Low battery voltage alarm trip and reset levels

• Low battery voltage cut-off and restart levels

• Dynamic cut-off: load dependent cut-off level

• Output voltage 210 - 245V

• Frequency 50 Hz or 60 Hz

• ECO mode on/off and ECO mode sense level

 

Monitoring:

• In- and output voltage, % load and alarms

 

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

 

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

 

Remote on/off

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

 

LED diagnosis

Please see manual for a description.

 

To transfer the load to another AC source: the automatic transfer switch

For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

 

DC connection with screw terminals

No special tools needed for installation

 

Full Specifications

  • Part Number : PIN485010500
  • Manufacturer : Victron Energy
  • Output Wave Form : Pure Sine Wave
  • Voltage (V) : 48
  • Frequency (Hz) : 50Hz or 60Hz
  • Watts : 400
  • Peak Power (W) : 900
  • Continuous Output Power (VA) : 500
  • Length (Mm) : 275
  • Width (Mm) : 172
  • Height (Mm) : 86
  • Manufactured Weight (Kg) : 3.9
  • Remote Control : No
Read more
189.24 EUR VAT included
The product is in stock
Details
59
Phoenix Inverter 48/800 VE. Direct NEMA 5-15R
  • Brand: Victron Energy

Highly Reliable - built for the years ahead

Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.

 

Full bursts - High Peak output

Some electronic devices - particularly those which have an electric motor - require short burst of energy on start-up which is much higher than their rated power consumption. No problem - the Phoenix inverter has industry-leading peak-power capability.

 

Intelligent alarms, shut-downs, and re-starts

A high power draw on start-up can trigger false alarms, and shut-downs. Phoenix makes allowance for this and only shuts down in cases of persistent overload. Intelligently - shut downs will be followed by a series of re-starts - to eliminate 'false alarms'.

 

Conserve power with Eco mode

In Eco mode the inverter shuts down when no power is required. Phoenix senses the output socket every couple of seconds and automatically turns back on if power is again required.

 

User-configurable settings

Phoenix has a communication port providing access to status information, alarms and automatic user-configurable low-voltage shut downs. Shut downs will be followed by a series of intelligent re-start attempts. User settings can be accessed from your computer or mobile device via VictronConnect - our free-to-use app.

 

Features

VE.Direct communication port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable needed)

• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

 

Fully configurable:

• Low battery voltage alarm trip and reset levels

• Low battery voltage cut-off and restart levels

• Dynamic cut-off: load dependent cut-off level

• Output voltage 210 - 245V

• Frequency 50 Hz or 60 Hz

• ECO mode on/off and ECO mode sense level

 

Monitoring:

• In- and output voltage, % load and alarms

 

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

 

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

 

Remote on/off

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

 

LED diagnosis

Please see manual for a description.

 

To transfer the load to another AC source: the automatic transfer switch

For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

 

DC connection with screw terminals

No special tools needed for installation

 

Full Specifications

  • Part Number : PIN481800500
  • Manufacturer : Victron Energy
  • Output Wave Form : Pure Sine Wave
  • Voltage (V) : 48
  • Frequency (Hz) : 50Hz or 60Hz
  • Watts : 650
  • Peak Power (W) : 1500
  • Continuous Output Power (VA) : 800
  • Length (Mm) : 305
  • Width (Mm) : 216
  • Height (Mm) : 105
  • Manufactured Weight (Kg) : 5.5
  • Remote Control : No
Read more
323.39 EUR VAT included
The product is in stock
Details
60
Victron Energy MultiPlus Compact 24/2000/50-50 120V
  • Brand: Victron Energy

Victron Energy Part Number: CMP242200100 or MultiPlus Compact 24/2000/50-50

MultiPlus Compact 24/2000/50-50 Features:

  • PowerControl: YES
  • PowerAssist: YES
  • Transfer switch (A): 50A
  • Parallel and 3-phase operation: YES

 

MultiPlus Compact 12/2000/50-50 Specifications:

  • Input voltage range (V DC): 9.5 – 17V
  • Output: 120V 60Hz
  • Cont. output power at 25 °C (VA): 2000
  • Cont. output power at 25 °C (W): 1600
  • Cont. output power at 40 °C (W): 1450
  • Peak power (W): 4000
  • Maximum efficiency (%): 92
  • Zero-load power (W): 9
  • Zero load power in AES mode (W): 7
  • Zero load power in Search mode (W): 3

 

Charger Specifications:

  • Charge voltage ‘absorption’ (V DC): 14.4
  • Charge voltage ‘float’ (V DC): 13.8
  • Storage mode (V DC): 13.2
  • Charge current house battery (A): 50
  • Charge current starter battery (A): 4
  • Battery temperature sensor: YES
  • Weight: 25 lbs
  • Dimensions (H x W x D): 20.5″ x 10″ x 5″

 

Multifunctional, with intelligent power management
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below.

Two AC Outputs
The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more).

Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.

Three phase capability
In addition to parallel connection, three units of the same model can be configured for three-phase output. But thatÂ’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.

PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10A per 5kVA Multi at 230VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Four stage adaptive charger and dual bank battery charging
The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery (trickle charge output available on 12V and 24V models only).

System configuring has never been easier
After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a new DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features

Read more
1219.29 EUR VAT included
The product is in stock
Details
61
Victron Energy Quattro 12/5000/200-100/100 120V
  • Brand: Victron Energy

Two AC inputs with integrated transfer switch

The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist feature

The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Virtually unlimited power thanks to parallel operation

Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

Read more
4014.80 EUR VAT included
The product is in stock
Details
62
Victron Energy Quattro 24/5000/120-100/100 120VAC
  • Brand: Victron Energy

Two AC inputs with integrated transfer switch

The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist feature

The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Virtually unlimited power thanks to parallel operation

Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

Read more
3533.33 EUR VAT included
The product is in stock
Details
63
Victron Energy Quattro 48/3000/35-50/50 120VAC
  • Brand: Victron Energy

Two AC inputs with integrated transfer switch

The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist feature

The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Virtually unlimited power thanks to parallel operation

Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

Read more
2193.05 EUR VAT included
The product is in stock
Details
64
Victron Energy Quattro 48/5000/70-100/100 120VAC
  • Brand: Victron Energy

Two AC inputs with integrated transfer switch

The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist feature

The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Virtually unlimited power thanks to parallel operation

Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

Read more
3005.12 EUR VAT included
The product is in stock
Details
65
Victron Quattro 48/10000/140-100/100 120V VE.Bus
  • Brand: Victron Energy

QUATTRO

Two AC inputs with integrated transfer switch 
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.

Two AC Outputs 
The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist feature 
The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Virtually unlimited power thanks to parallel operation 
Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

Read more
4613.67 EUR VAT included
The product is in stock
Details
66
Victron Energy MultiPlus 12/500/20-16 VE.Bus
  • Brand: Victron Energy
The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.

Uninterrupted AC power (UPS function):
In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption

Remote Monitoring and Control:
Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more…

Proven reliability:
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 PowerControl – Dealing with limited generator, shore side or grid power:
With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist – Boosting the capacity of shore or generator power:
Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools

Programmable relay:
 By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).

Voltage (V): 12

Peak Power (W) : 900
Max Efficiency: 90%
Programmable Relay: Yes
Dimensions: H311 x W182 x D100mm
Battery Temperature Sensor: Yes
Remote on-off: On/off/charger only
Protection Category: IP21
Three Phase and Parallel Operation: Yes
Transfer Switch (A): 16
Cont. Output Power at 25°C (VA): 500
Cont. Output Power at 25°C (W) : 430
Cont. Output Power at 40°C (W) : 400
Cont. Output Power at 65°C (W) : 300
Zero Load Power (W): 6
Zero Load Power in Search Mode (W): 2
Charge Current House Battery (A): 20
Charge Current Starter Battery (A): 1
VE.Bus Communication Port:
For parallel and three phase operation, remote monitoring and system integration
DIP switches: Yes
Internal DC fuse : 125A
Read more
475.50 EUR VAT included
The product is in stock
Details
67
Inverter RS 48/6000 230V Smart Solar
  • Brand: Victron Energy

The Inverter RS Smart Solar is a combination of a powerful 48VDC, 6kVA 230VAC inverter and a high voltage, 80-450VDC, 4kW MPPT solar charger. Thanks to its modern design and high frequency technology the inverter only weighs 11kg and has an excellent efficiency, low standby power, and very quiet operation. 

The inverter is equipped with a display to read out battery, inverter, and solar charger details. These parameters can also be read out via Bluetooth by the VictronConnect App. In addition to this, the inverter has a VE.Direct and a VE.Can Port, for connection to a GX device for system monitoring.

Inverter RS Smart Solar 48/6000
INVERTER
DC Input voltage range 38 – 64 V
Output Output voltage: 230 VAC ± 2%
Frequency: 50 Hz ± 0.1% (1)
Continuous output power at 25°C Increases linearly from 4800 W at 46 VDC to 5300 W at 52 VDC
Continuous output power at 40°C: 4500W
Continuous output power at 65°C: 3000W
Peak power 9 kW for 3 seconds
Short-circuit output current: 50A
Maximum efficiency: 96.5% at 1 kW load 94% at 5 kW load
SOLAR:
Maximum DC voltage: 450V
Nominal DC voltage: 300V
Start-up voltage: 120V
MPPT operating voltage range 80 – 450V
DC input current limit: 18A
Maximum DC input current: 20A
Maximum PV input power: 4000W
Maximum DC charging power:  4000W

Read more
2274.51 EUR VAT included
The product is in stock
Details
68
Phoenix Inverter 12/250 230V VE.Direct IEC
  • Brand: Victron Energy
Description
 

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.

 

Features

VE.Direct communication port

The VE.Direct port can be connected to:

  • A computer (VE.Direct to USB interface cable needed)
  • Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

  • Low battery voltage alarm trip and reset levels
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage 210 – 245V
  • Frequency 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level

Monitoring:

  • In- and output voltage, % load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 
Read more
146.81 EUR VAT included
The product is in stock
Details
69
Phoenix Inverter 12/250 230V VE.Direct SCHUKO
  • Brand: Victron Energy
Description
 

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.

 

Features

VE.Direct communication port

The VE.Direct port can be connected to:

  • A computer (VE.Direct to USB interface cable needed)
  • Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

  • Low battery voltage alarm trip and reset levels
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage 210 – 245V
  • Frequency 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level

Monitoring:

  • In- and output voltage, % load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 
Read more
146.81 EUR VAT included
The product is in stock
Details
70
Phoenix Inverter 12/250 230V VE.Direct UK
  • Brand: Victron Energy
Description
 

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.

 

Features

VE.Direct communication port

The VE.Direct port can be connected to:

  • A computer (VE.Direct to USB interface cable needed)
  • Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

  • Low battery voltage alarm trip and reset levels
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage 210 – 245V
  • Frequency 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level

Monitoring:

  • In- and output voltage, % load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 
Read more
114.32 EUR VAT included
The product is in stock
Details
71
Phoenix Inverter 48/250 230V VE.Direct IEC
  • Brand: Victron Energy

Description
 

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.

Features

VE.Direct communication port

The VE.Direct port can be connected to:

  • A computer (VE.Direct to USB interface cable needed)
  • Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

  • Low battery voltage alarm trip and reset levels
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage 210 – 245V
  • Frequency 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level

Monitoring:

  • In- and output voltage, % load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 

Read more
116.87 EUR VAT included
The product is in stock
Details
72
Phoenix Inverter 48/250 230V VE.Direct UK
  • Brand: Victron Energy

Description
 

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.

Features

VE.Direct communication port

The VE.Direct port can be connected to:

  • A computer (VE.Direct to USB interface cable needed)
  • Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

  • Low battery voltage alarm trip and reset levels
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage 210 – 245V
  • Frequency 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level

Monitoring:

  • In- and output voltage, % load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 

Read more
146.81 EUR VAT included
The product is in stock
Details

Compara produse

You must add at least one product to compare products.

Was added to wishlist!

Was removed from wishlist!